- Double-end design with bottle infeed from one end of the machine and discharge from the other end, minimizing the risk of cross-infection
- Separate drive for bottle pockets and infeed/discharge sections, with imported frequency controllers. Mechanical synchronization to connect the 3 parts
- Starwheel connecting rod rotation arms for both machine infeed and discharge that ensure a gentle, reliable and low-noise operation.
- Spraying systembottles are preheated by lower and upper spraying systems at machine infeed section to prevent contamination of the downstream treatment sections. Bottle inner and surface spraying on top of the caustic tank. The machine end contains hot water, warm water and fresh water spraying.Fixed spraying for bottle outer surface and rotary spraying for inner surface to achieve optimal cleaning.
- Label removing deviceMultiple label removal procedure
- Heating systemheating by means of ascending pipe steam. Steam pass through the heat coil while the caustic solution going through the external pipe for efficient heat exchange, making the best of energy sources
- The machine includes pre-heating spraying, caustic soaking and hot water soaking sections. Bottles go through sufficient caustic and hot water soaking, then multiple hot caustic, hot water, warm water and fresh water spraying to guarantee bottle cleaning.
- Tanks are separated from each other to reduce risk of cross-contamination. Hydrogen exhausting fan at caustic tankfor safety
- High-strength and durable steel bottle pockets. plastic bottle pockets are optional
- The inlet of cautic spraying pipes in all sections are equipped with filters with different diameters which prevents spray nozzles from being clogged
- Stainless steel for discharge section. Auto clean spraying pipe to sterilize the inside of this housing
- The temperature value of the hot water and hot caustic in the abovementioned baths can be set and PID parameters can be modified on the operation panel to achieve precise control
- Fault alarm, operation status and running speed displayed on HMI
- Automatic online caustic concentration measuring device, optional caustic dosing system
|
Model & Size |
SXP32D double-end Bottle Washer |
SXP32H double-end Bottle Washer |
SXP44D double-end Bottle Washer |
SXP44J double-end Bottle Washer |
SXP44JH double-end Bottle Washer |
SXPX47 double-end Bottle Washer |
|
Nominal Capacity |
24000 |
24000 |
36000 |
40000 |
40000-50000 |
50000 |
|
Chain pitch |
155mm |
155mm |
155mm |
155mm |
155mm |
155mm |
|
Bottle pocket pitch |
95mm |
95mm |
95mm |
95mm |
95mm |
95mm |
|
Bottle Diameter |
60-82mm |
60-83mm |
60-83mm |
60-83mm |
60-83mm |
60-83mm |
|
Bottle Height |
160-295mm |
160-295mm |
160-295mm |
160-295mm |
160-295mm |
160-295mm |
|
Bottle pockets per carrier |
32 |
32 |
44 |
44 |
44 |
47 |
|
Bottle pockets carriers(total/loaded) |
518 / 415 |
590 / 473 |
518 /415 |
640 /516 |
691 /567 |
719 /584 |
|
Loading bottles |
13280 |
15136 |
18260 |
22704 |
24948 |
27448 |
|
Bottle pocket move tempo |
4.8s |
4.8s |
3.96 s |
3.96 s |
3.96 s |
3.07 s |
|
Caustic soaking time |
16min |
17.86min |
13.4min |
20.1min |
21.15min |
16.48min |
|
Time of bottle staying in the machine |
33.2min |
37.76min |
27.4min |
34min |
37.5min |
29.9min |
|
Pre-soaking |
2m3 |
2m3 |
2.8m3 |
2.8m3 |
1.8 m3 |
1.6 m3 |
|
DetergentI |
20.8m3 |
20.8m3 |
27.8m3 |
27.8m3 |
29.2 m3 |
37 m3 |
|
DetergentII |
22.4m3 |
22.4m3 |
30m3 |
30m3 |
32.5m3 |
37m3 |
|
DetergentIII |
23.2m3 |
23.3m3 |
31.2m3 |
32m3 |
30.25m3 |
37m3 |
|
DetergentIV |
15.4m3 |
31.2m3 |
40 m3 |
37 m3 |
||
|
Heat water soaking time |
5.5m3 |
5.5m3 |
7.3m3 |
7.3m3 |
7.8m3 |
6.3m3 |
|
Heat Water |
1.7m3 |
1.7m3 |
2.3m3 |
2.3m3 |
2.5m3 |
2.5 m3 |
|
Warm water |
1.7m3 |
1m3 |
1.4 m3 |
1.4m3 |
1.6 m3 |
2.0 m3 |
|
Clean water consumption |
Water pressure at 0.15 0.2MPa: 0.5L/b (running normally) |
Water pressure at 0.15 0.2MPa: 0.5L/b (running normally) |
Water pressure at 0.15 0.2MPa: 0.5L/b (running normally) |
Water pressure at 0.15 0.2MPa: 0.5L/b (running normally) |
Water pressure at 0.15 0.2MPa: 0.5L/b (running normally) |
Water pressure at 0.15 0.2MPa: 0.5L/b (running normally) |
|
Clean steam consumption |
Steam pressure at 0.5MPa: 27kg/1000b(running normally) |
Steam pressure at 0.5MPa: 27kg/1000b(running normally) |
Steam pressure at 0.5MPa: 27kg/1000b(running normally) |
Steam pressure at 0.5MPa: 27kg/1000b(running normally) |
Steam pressure at 0.5MPa: 27kg/1000b(running normally) |
Steam pressure at 0.5MPa: 27kg/1000b(running normally) |
|
Total installed power |
approx 115kW |
approx 110.5kW |
approx 150kW |
approx 162kW |
approx 177kW |
approx 196.41kW |
|
Weight |
approx 108t |
approx 127t |
approx 135t |
approx 172t |
approx 195t |
approx 195 t |
|
Operation weight |
approx 204t |
approx 240t |
approx 245t |
approx 343t |
approx 379t |
approx 420t |
|
Overal dimension (L*W*H) |
17.3×7.4×4.6 m |
19.46×7.2×4.5 m |
17.4×8.4×4.5 m |
20.6×8.4×4.5 m |
22×8.4×4.5 m |
22.4×9.2×4.5 m |
US 11777 
GB 8702 
AU 7932 
CA 7878 
IE 4248 
NZ 4214 
BR 1397 
CN 951 
