Handy Drive Unit Selectable From 3 Types According To Application
*Standard Type – 35
The standard type measurable with different attitudes including horizontal, inclinde, vertical and ceiling surfaces.
Accretech Portable Surface Texture Measuring Instruments Handysurf+
Portable Surface Texture Measuring Instruments New HANDYSURF reborn with sophisticated design for global use responding to diverse needs by MSP Metrology (M) Sdn Bhd from Accretech Japan.
Models
*Retract Type – 40
Retract Type that reduces damage to the stylus and pick-up by raising the pickup while for measurement or at ending. It can be used as a detector incorporated into an automatic machine.
*Transverse Trace Type – 45
The transverse trace type where the pickup moves sideways. Narrow areas, such as crankshaft pins and journals, that were difficult to measure before can now be measured.
High Resolution With High Measuring Range
HANDYSURF+ does not need to set up measuring range. This instrument has the Z direction measuring range of 370µm, which is the widest in class, and achieved a resolution as high as 0.0007µm over the entire range.
Multiple Analysis Function
Graphic representation of measurement results enables their on-site verification with parameter and waveform.
Automatic Judgement
By setting the conditions in advance, OK/NG judgement can be performed automatically.
Various Analyses
Despite being a portable instrument, it is capable of a variety of analyses including analyses of BAC, ADC, peak count and motifs.
High Resolution With High Measuring Range
HANDYSURF+ does not need to set up measuring range. This instrument has the Z direction measuring range of 370µm, which is the widest in class, and achieved a resolution as high as 0.0007µm over the entire range.
Multiple Analysis Function
Graphic representation of measurement results enables their on-site verification with parameter and waveform. Moreover, despite being a portable instrument, it is capable of a variety of analyses including analyses of BAC, ADC, peak count and motifs. By setting the conditions in advance, OK/NG judgement can be performed automatically.
Full Specifications
| Model | HANDYSURF+ | ||||||
| 35 | 40 | 45 | |||||
| Tip Radius | 5μmR | 2μm | 5μm | 2μm | 5μm | ||
| Measurement Range | Z-axis direction | -210 to +160μm | |||||
| Drive axis | X-direction 16mm | Y-direction 16mm | |||||
| Tracing Driver | Movement Type | Standard Type | Retraction Type | Horizontal Tracing Type | |||
| Evaluation Length | 0.2 to 16mm | 0.2mm to 4.0mm | |||||
| Measurement Speed | 0.5, 0.6, 0.75, 1.0 mm/s | ||||||
| Analysis Item | Calculation Standards | Complies with JIS2013/2001, JIS1994, JIS1982, ISO2009/1997, DIN1990, ASME 2002/2009, ASME1995, CNOMO | |||||
| Parameter | Roughness Curve | Ra, Rq, Rz, Rv, Rc, Rt, RSm, RΔq, Rsk, Rku, Rmr(c), Rmr, Rδc, Rz94, R3z, RΔa, Ry, Sm, S, tp, PC, RPc JIS, RPc ISO, RPc EN, Pc, PPI, Rp, Rmax, Mr1, Mr2, Rpk, Rvk, Rk, Vo, K, A1, A2, Rpm, Δa, Δq, Htp | |||||
| Profile Curve | Pt, Rmax, Rz, Rk, Rpk, Rvk, Mr1, Mr2, Vo, K, tp | ||||||
| Motif | R, Rx, AR, W, Wx, Rke, Rpke, Rvke, NCRX, NR, CPM, SR, SAR, Wte, NW, SAW, SW, Mr1e, Mr2e, Vo, K | ||||||
| Evaluation Curves | Profile Curve, Roughness Curve, ISO13565 Special Roughness Curve, Roughness Motif Curve, Waviness Motif Curve, Upper Envelope Waviness Curve | ||||||
| Characteristics Graph | Bearing Area Curve, Amplitude Distribution Curve | ||||||
| Filter | Filter Type | Gaussian filter, 2RC (phase compensation), 2RC (non-phase compensation) | |||||
| Cut-off values | λc | 0.08, 0.25, 0.8, 2.5mm | |||||
| λs | None, 2.5, 8μm | ||||||
| Pickup | Sensing Type | Differential Inductance | |||||
| Measurement Method | Skid | ||||||
| Z Direction Resolution | 0.0007μm/-210 to +160μm | ||||||
| Model | E-DT-SM10 | E-DT-SM49A | E-DT-SM10A | E-DT-SM49A | E-DT-SM39A | ||
| Stylus | Measuring Force | 4mN | 0.75mN | 4mN | 0.75mN | 4mN | |
| Tip Radius | rtip = 5μm | rtip = 2μm | rtip = 5μm | rtip = 2μm | rtip = 5μm | ||
| Tip Angle | 90° cone | 60° cone | 90° cone | 60° cone | 90° cone | ||
| Tip Material | Diamond | ||||||
| Amplification Indicator | Display | 2.4 inch Color Liquid Crystal Panel | |||||
| Data Output | USB Connector for USB Memory/Printer Connection x 1, Micro USB Connector for USB Communication x 1 | ||||||
| Print Output | Optional (external printer unit) / Thermal Recording Paper (roll) Width: 58mm (Recording width: 48mm) | ||||||
| Language | Japanese, English, Chinese (Traditional Chinese/Simplified Chinese), Korean, Thai, Malay, Vietnamese, Indonesian, Germany, French, Italian, Czech, Polish, Hungarian, Turkish, Swedish, Dutch, Spanish, Portuguese | ||||||
| Specifications | Power Source | Charging | Built-in rechargeable battery (charged with AC adapter, PC USB Port, USB Battery), Charging time: 4 hours (about 1000 measurements can be taken when fully charged) | ||||
| Voltage | AC 100V to 240V ±10%, 50/60Hz, Single Phase (Included AC Adapter) | ||||||
| Power Consumption | Maximum 10W | ||||||
| Dimension (W x D x H) and weight | Amplification Indicator: 184.5mm x 68mm x 57.4mm, approx. 500g for the entire system | ||||||
Contact us today to inquire about the Accretech Portable Surface Texture Measuring Instruments Handysurf+ and enhance your surface texture measurement capabilities.
