Just Purchase Your New Factory? What Is The Important Steps About Flooring Should You Take At The First Place? - ETP COATING SOLUTION SDN. BHD.

Flooring is one of the most critical foundations of your factory operations because it directly affects safety, durability, hygiene, and productivity. If you just purchased your factory, here are the important steps about flooring you should take first:

First Steps for Factory Flooring
1. Assess the Existing Floor Condition

Inspect for cracks, unevenness, spalling, or moisture issues.
Check if the slab strength is suitable for your operations (load capacity, vibration, impact).
Test for moisture content (important before applying coatings like epoxy or PU).
Review previous coatings (if any) to decide if removal or repair is needed.

2. Understand Operational Requirements
Ask yourself:

Load capacity → Will heavy forklifts, pallets, or machinery operate on it?
Chemical resistance → Will the floor be exposed to oils, acids, or solvents?
Hygiene → Do you need food-grade, dust-free, or easy-to-clean surfaces?
Safety → Should it be anti-slip, anti-static (ESD), or fire-resistant?
Temperature → Will it face high heat (ovens) or freezing conditions (cold storage)?

3. Plan the Right Flooring System

Epoxy Flooring → General industrial use, dust-proof, chemical-resistant.
PU (Polyurethane) Flooring → Heavy-duty, thermal shock resistance, food & beverage industries.
Concrete Densification/Polishing → Dust-free, hard, low maintenance, cost-effective.
Vinyl/Other Specialized Floors → For offices, cleanrooms, or medical facilities.

4. Check Compliance & Safety

Ensure flooring meets local regulations (DOSH, DOE, HACCP, GMP, ISO depending on your industry).
Include slip resistance in wet/oily areas.
Mark safety zones, walkways, and forklift lanes with floor line marking paint.

5. Prepare the Surface

Remove old coatings, adhesives, or contaminants.
Grind, shot-blast, or scarify the floor for proper adhesion.
Repair cracks, joints, and potholes.
Ensure moisture-proofing (install damp-proof membrane if needed).

6. Install the Flooring

Apply primer, base coat, and final finish according to system chosen.
Allow proper curing time before equipment installation.
Test adhesion and surface strength after completion.

7. Maintenance Plan

Schedule regular inspections for cracks, peeling, or wear.
Set cleaning procedures (machine scrubbers, chemical-safe detergents).
Repair small damages quickly to avoid costly shutdowns.

In summary:
The first steps are inspection, requirement analysis, and surface preparation. Only then choose the right flooring (Epoxy, PU, or Polished Concrete) based on your factory’s operations.

Full Name *
Email *
Contact Number *
Company Name
Company Address
Subject *
How can we help you? *