The primary function of the controller is to supply power to the light source while managing its brightness and on/off status.
Additionally, the controller can enable the light source to strobe by receiving a trigger signal, significantly extending its lifespan.
The digital controller also supports remote operation via PC equipment, allowing workers to select the appropriate controller type based on specific production needs.


Model : 

 

---

Features : 
 

• Exquisite appearance
• Easy to install
• Add guide rail buckle
• Easy to operate
• Operation panel front
• Silent fan
• More power
• Good heat dissipation
• Constant current stable output/no flicker

 

---

Dimension :



 

---

Parameters : 
 

Model	Number of channels	Power/CH	Output voltage	external trigger
KM-ACS2.0-4C015W-24PS	4	15W	24V	Have
KM-ACS2.0-4C030W-24PS	4	30W	24V	Have

 

---

Technical Indicators :
 

Project	Parameter	Illustrate
Control method	Constant current	-
Input voltage	100-220VAC	-
Output voltage range	DC14V~24V	-
Number of channels	4 channels	-
Adjustable brightness level	Promise	Adjust by potentiometer
Single channel output maximum power	30W	-
External trigger method	Passive trigger, high and low level trigger switchable	Effective trigger voltage range: 5-24V DC
External trigger delay time	L, ON-OFF<60us	H, represents high level trigger;
	H, OFF ON <60us	L, represents low level trigger;
	L, ON-OFF<80us	ON and OFF represent LED
	L, OFF ON <80us	The on and off state of the light source
External trigger frequency	<1/T	Determined by the strobe time, if T=1 ms, the maximum external trigger frequency is 1KHz
Working environment	Temperature-10~50℃	-
	Humidity 20~80%RH non-condensing	-
Storage environment	Temperature-20~70℃	-
	Humidity 10~55%RH non-condensing	-
Standby power consumption	<3W	-
Overall dimensions (mm)	135×85×158mm	L × W × H
Weight	0.9Kg	-