The primary function of the controller is to supply power to the light source while managing its brightness and on/off status.
Additionally, the controller can enable the light source to strobe by receiving a trigger signal, significantly extending its lifespan.
The digital controller also supports remote operation via PC equipment, allowing workers to select the appropriate controller type based on specific production needs.
Model :
Features :
- Exquisite appearance
- Easy to install
- Add guide rail buckle
- Easy to operate
- Operation panel front
- Silent fan
- More power
- Good heat dissipation
- Constant current stable output/no flicker
Dimension :
.png)
Parameters :
| Model | Number of channels | Power/CH | Output voltage | external trigger |
| KM-ACS2.0-4C015W-24PS | 4 | 15W | 24V | Have |
| KM-ACS2.0-4C030W-24PS | 4 | 30W | 24V | Have |
Technical Indicators :
| Project | Parameter | Illustrate |
| Control method | Constant current | - |
| Input voltage | 100-220VAC | - |
| Output voltage range | DC14V~24V | - |
| Number of channels | 4 channels | - |
| Adjustable brightness level | Promise | Adjust by potentiometer |
| Single channel output maximum power | 30W | - |
| External trigger method | Passive trigger, high and low level trigger switchable | Effective trigger voltage range: 5-24V DC |
| External trigger delay time | L, ON-OFF<60us | H, represents high level trigger; |
| H, OFF ON <60us | L, represents low level trigger; | |
| L, ON-OFF<80us | ON and OFF represent LED | |
| L, OFF ON <80us | The on and off state of the light source | |
| External trigger frequency | <1/T | Determined by the strobe time, if T=1 ms, the maximum external trigger frequency is 1KHz |
| Working environment | Temperature-10~50℃ | - |
| Humidity 20~80%RH non-condensing | - | |
| Storage environment | Temperature-20~70℃ | - |
| Humidity 10~55%RH non-condensing | - | |
| Standby power consumption | <3W | - |
| Overall dimensions (mm) | 135×85×158mm | L × W × H |
| Weight | 0.9Kg | - |
