Media Converter Fast Ethernet / Gigabit Ethernet – 200km Single Mode Multi-Mode Bi-di WDM

• Comply with IEEE 802.3, 802.3u, 802.3ab and 802.3z Ethernet Standard
• Support IEEE 802.3ah In-band and TS 1000 OAM management
• Front panel test button to trigger auto loopback test
• Support SFP DDM (Digital Diagnostics Monitoring)
• Support WDM Bi-directional SFP module with specific wavelength for various distance
• Support copper line cable diagnostics feature Comply with IEEE 802.1q Tag VLAN
• Support Q-in-Q function
• Maximum Frame size 9K bytes
• Ethernet bandwidth Control
• Support Flow Control, Auto-Cross over for MDI/MDIX on TP port LED indicators for ease of network diagnostic
• Support Link status Transparent Prompt indication on network failure
• Firmware upgrade via HTTP
• Built-in IP-based WEB GUI configuration and maintenance Centralized management for CO-side equipment

Model

• ENTU 763S/GE, stand alone Gigabit Ethernet NTU
• ENTU 763S/FE, stand alone Fast Ethernet NTU
• iEAC-16, 2U 19” Rack, 16 slots for line card
• Controller with NMS/WEB agent (MCU-16)
• Hot Swappable Redundant AC/DC Power Modules (iEAC-AC or iEAC-DC)
• Green FAN facility, ON and OFF by internal temperature (iEAC-FAN)
• Line card ENTU 763C/FE, ENTU 763C/GE

Network Interface

• Connector type: SFP-LC
• ENTU 763S/FE: 100Base-FX SFP modules
• ENTU 763S/GE: 100Base-FX or 1000Base-X SFP modules
• Support SFP DDM (Digital Diagnostic Monitoring)
• Temperature, Voltage, Current, Tx Power, Rx Power
• Support 1000Base-LX, 20Km, Dual WDM, for redundant fiber link protection
• For detailed wavelength and distance of SFP modules, please refer to SFP Transceivers datasheet

User Interface

• Connector type: Shield RJ-45 jack
• ENTU 763S/FE: 10Base-T/100Base-Tx
• ENTU 763S/GE: 10Base-T/100Base-Tx/1000-BaseT
• Auto-MDI/MDIX detection
• Auto-negotiation for speed and duplex
• Full duplex / Half duplex support
• Support copper line cable diagnostics feature
• Complies with IEEE 802.1q Tag VLAN (including Q-in-Q)
• Ethernet bandwidth control and support Jumbo frame

Management & OAM Functions

• Configuration via craft port VT-100 and WEB GUI
• Console: RJ45 connector (RS232C)
• HTTP firmware upgrade
• RMON counter
• Front panel test button for easy loop healthy testing
• Reset button back to factory default
• Support IEEE 802.3ah Link Layer OAM
• Auto discovery
• Link monitoring
• Remote loopback test
• Remote fault detection
• Link Fault Reflection
• Dying Gasp
• Critical Event
• Support TS-1000 OAM
• Loopback test
• Reset remote device
• Get remote device information
• Remote port setting

LED Indicators

• ENTU series:

PWR, LNK, CO, TST, TP, RF, LAN LNK/SPD

Power Requirement

• AC/DC, DC/DC external power adapter (12V, 0.5A)
• Power consumption:

ENTU 763S/FE = 1.8W
ENTU 763S/GE = 3.3W

Dimension

• ENTU 763S: 87(W) x 172(D) x 24(H) mm

Operating Environment

• Operation Temperature: 0 oC ~ 50 oC
• Storage Temperature: -20 oC ~ 70 oC
• Humidity: 90%, non-condensing