Features

• Optimized pumping speed due to auto regulation of operating voltage by the controller
• Convenient access to all elements of the vacuum system by utilizing either the analog or RS232/485 ports
• Multiple configurations available to suit your needs - whether operating one to four pumps with varying sizes, from 20 to 500 liters/second
• Applied high voltage is optimized as a function of pressure, providing more accurate pressure readings, allowing pressure measurement in the 10-10 mbar range - the UHV region
• Protect mode limits the current to protect the pump and controller.
• Cable is equipped with an interlock system which immediately shuts down the high voltage when the plug is removed from the pump
• The AC component of the HV output is reduced to a minimum, virtually eliminating the need for additional filters - especially useful for SEM applications

Technical Specifications

Technical Specifications
Input Voltage	100 – 240 Vac (+/-10%)
Input Frequency	50/60 Hz
Dimensions	400.5 x 211.4 x 177.0 (l x w x h)
Display	4 rows with 20 characters
Available configurations	1x120W, 1x200W, 2x80W, 2x200W, 4x80W, 2x80W+1x200W
Minimum Configuration	One HV card with 120W, 200W or 2x80W
Output Voltage (Open Circuit)	3, 5 and 7 kV
Output Current (Short Circuit)	40 mA for 80 W channel, 100 mA for 200 W channel
Modes of Operation	Local / Serial / Remote
Front Panel Readings	Voltage, Pressure, Current, Status
Safety Marks	CE, C_CSA_US
Current Measurement Range	10 nA to 100 mA
Input Signals	On/off; Protect; Step Mode;
Output Signals	Analog Out; NC Set-point; NO Set-point
HV Connector	Fischer Type 105
Output Power Maximum	400 W

 

Ordering Details



Outline Drawing