- Pump has a diode configuration and provides approximately 0.4 l/s of nitrogen pumping speed
- Pumps can be customized with different high-voltage feedthroughs, body geometries, and pumping cell arrangements.
- The 2 l/s Miniature VacIon pump has been modified to enhance starting at low pressure.
- The 10 l/s Miniature VacIon pump is highly efficient for dealing with residual gases such as hydrogen.
Technical Specifications
| Input | 90 to 130 VAC or 180 to 240 VAC or 24 VDC |
| Output |
Voltage: ± 5000 VDC (open load) Current: 15 mA (short circuit) Maximum Power: 21 W (3 kV at 7 mA) |
| Front Panel |
HV ON, HIGH LOAD, and POLARITY LEDs LED bargraph linear scale for current and voltage indication Recorder Output 0 to +10 VDC linear proportional to current (10 V = 10 mA) |
| Safety Marks | CE, cCSAus |
| Conformity to Norms |
Safety: EN61010-1 EMI/EMC: EN61000-4-2, EN61000-4-3, EN61000-4-4 |
| Rear Panel |
Nine pin “D” type connector with following available signals and commands Recorder outputs:
HV ON confirm signal: Contact rating – 1 A at 250 VAC; 0.2 A at 30 VDC |
Ordering Details
Outline Drawing
| Input | 90 to 130 VAC or 180 to 240 VAC or 24 VDC |
| Output |
Voltage: ± 5000 VDC (open load) Current: 15 mA (short circuit) Maximum Power: 21 W (3 kV at 7 mA) |
| Front Panel |
HV ON, HIGH LOAD, and POLARITY LEDs LED bargraph linear scale for current and voltage indication Recorder Output 0 to +10 VDC linear proportional to current (10 V = 10 mA) |
| Safety Marks | CE, cCSAus |
| Conformity to Norms |
Safety: EN61010-1 EMI/EMC: EN61000-4-2, EN61000-4-3, EN61000-4-4 |
| Rear Panel |
Nine pin “D” type connector with following available signals and commands Recorder outputs:
HV ON confirm signal: Contact rating – 1 A at 250 VAC; 0.2 A at 30 VDC |
US 1225 
MY 543 
CN 275 
AP 106 
AU 58 
SG 43 
CA 29 
GB 29 
