Point level detection in a heat exchanger
Process data
Application
Heat exchanger in a power plant
Output
6000 kW
Medium
Steam, water
Pressure
max. 40 bar
Temperature
max. 400° C
Application
A large power plant needed a redundant overfill protection system for four of its boilers. Planning and implementation of the project were carried out by the engineering firm Wolter & Dros B.V. The heat exchangers, which were already equipped with mechanical float switches, have an output of 6000 kW each. The biggest danger in this application is the occurrence of hydraulic shock. A good overfill protection system must be able to survive such abrupt pressure surges unscathed. To provide twofold safety, the sensor should be based on a completely different measuring principle. By using two different measuring principles, systemic flaws can be eliminated.
Recommended products
VEGASWING 66
The solution
VEGASWING 66 is the ideal solution for this application.
With a temperature range of -196 ... +450° C and a maximum pressure of 160 bar, it’s just perfect for this demanding measurement task.
From the wide range of options the operator chose a robust aluminium housing and a standard, size G1 threaded fitting. Together with a relay output, the VEGASWING 66 sensor fit like custom made into the existing power plant systems.
This solution increases not only the reliability of the system but also its safety margin. If one of the two overfill protection systems fails, continued, trouble-free operation of the boiler is guaranteed.
User benefits
- Durable and resistant to pressure surges
- Universally applicable - independent of density and dielectric constant of the medium
- Safety ensured through additional, different measuring System
- Accurate, reliable measurement
- Simple adjustment
- Cost savings through greater plant availability
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Version
Compact version
with gas-tight leadthrough
with tube extension
MY 605 
US 500 
CN 107 
AP 77 
AU 51 
CA 35 
SG 29 
AR 22 
