Features of Diamond-coated Routers
A very hard coating is formed by the diamond structure.
This hard and anti-wear coating shows good routing performance on very hard materials.
With Diamond-coated routers, it is possible to enhance tool-life and rout those difficult-to-machine materials that were impossible with conventional routers.
Technical Data
Diamond coated router for Aluminum panel
|
Work |
AC-7302(2W/mk) t1.5mm(Non copper,100μm/Insulating layer,1.5mm/Aluminum plate) x 1 panel/strack |
|---|---|
|
Conditions |
N = 30krpm, Fxy = 0.6m/min, f = 20μm/rev, Fz = 0.1m/min, DIB = 1.0mm |
Burr condition バリvz生状aK
Non-coat
(After 1m)
ULF coated
(After 1m)
New Diamond coated
(After 20m)
Cutting edge wear 切刃状aK
Non-coat
(After 1m)
ULF coated
(After 1m)
New Diamond coated
(After 20m)
DCRSE for PCB Assembly
Diamond coated router "DCRSE" has good performance for Aluminum 4000 series which is often used for Aluminum base panels in recent years.
Optimized coating and high-quality 2 flute/left-hand (down-draft) design achieve controlling burr and smooth surface.
To inquire for the detail, please click on "CONTACT" button below.
Panel Appearance
Conventional
Diamond-cut
Conventional
2 flute
New
DCRSE
Router Appearance (φ2.0)
Conventional
Diamond-cut
Conventional
2 flute
New
DCRSE
Material：A4045 Aluminum core panel t1.5mm
Routing Condition：N 30krpm、 F 0.6m/min
