| Durability |
High, but can become brittle under heavy impact |
Very high, flexible and impact-resistant |
Very high, surface hardens with densifier |
| Load Resistance |
Handles medium to heavy forklift traffic |
Excellent for very heavy loads and machinery |
Excellent for heavy loads, but joints can wear |
| Chemical Resistance |
Good (oils, solvents, mild chemicals) |
Excellent (acids, alkalis, solvents, even lactic acid in food industries) |
Limited (may stain or etch if exposed) |
| Thermal Resistance |
Limited (not good with heat shock) |
Excellent (withstands hot water washdowns, ovens, cold storage) |
Moderate (handles ambient changes but not thermal shock) |
| Slip Resistance |
Can be made anti-slip with additives |
Naturally better slip resistance |
Polished surface can be slippery unless treated |
| Hygiene |
Seamless, easy to clean, but may peel if moisture trapped |
Seamless, very hygienic, HACCP/GMP compliant |
Dust-free, but not fully seamless (joints remain) |
| Lifespan |
5–10 years (depends on thickness & use) |
8–15 years (longest lifespan if well maintained) |
10+ years with resealing/maintenance |
| Maintenance |
Needs recoating if worn; easy to clean |
Minimal maintenance; resists damage |
Periodic polishing/sealing needed |
| Installation Time |
Fast (2–5 days depending on area) |
Slower (3–7 days, more layers needed) |
Fast to medium (depends on grinding/polishing depth) |
| Cost (relative) |
$$ (affordable, medium range) |
$$$ (highest cost, premium) |
$ (most cost-effective long-term) |
| Best For |
General manufacturing, warehouses, automotive |
Food & beverage plants, cold rooms, chemical industries, heavy-duty factories |
Logistics centers, storage, workshops, cost-sensitive industries |
