Diameter - Distances - Contours
Now we're measuring "big"
Contour metrology from Mahr has been successfully used by hundreds of customers worldwide for decades. Due to many excellent customer solutions, many of them patented, contour metrology has undergone many important developments. Mahr was the first manufacturer of contour metrology offering the possibility of measurements with a twin stylus with simultaneous switching of the measuring force. This makes it possible not only to measure contours in one tracing direction but also to perform upside down measurements, thus enabling pairs of opposed profiles to be recorded and set off against each other, for diameter measurements, for example.
Today we are proud to present to you a decisive development that builts upon these possibities. in connection with the measuring stand MarSurf ST 750 D the emasuring stations UD120 / LD120 as well as XC 20CNC.
Technical Data
- Positioning length: 620 mm (deepest position approx. 110 mm above granite plate)
- Measuring length: 620 mm
- Working temperature: 21°C ±1° K 1)
-
Accuracy with LD 120/UD 120 MPE ±(1,4 + L/100) μm (L = measuring length in mm) 2)
with PCV MPE ±(2,5 + L/100) μm (L = measuring length in mm) 3) - Workpiece weight: Up to 90 kg with XY table CT 200
1) A deviating working temperature can lead to a deviation in accuracy
2) With probe arm item no. 6852008
3) With probe item no. 904582
US 7245 
BR 2830 
CA 1675 
AU 1647 
TH 1538 
JP 1445 
SG 1185 
MY 696 
