CS-iTEC flow sensor S 430
S 430 is based on the pitot tube principle to measure flow. Properly installed (refer to instruction manual for details) the sensor can measure in wet and dirty gases as occurring, for example, at the discharge of a compressor.
The sensor features long term stability , wide turn-down ratio and good temperature stability. It can be used in compressed air and non-corrosive gases.
Through a 1/2” G-type ball valve the sensor can be inserted into the pipe under pressure.
Various output signals allow the sensor to be connected to CS-iTEC displays and/or third party displays and PLCs.
html5: Video file not found
Application
S 430 measures:
– Standard flow and consumption
– Actual velocity
– Pressure
– Temperature
Product features
- Flow and consumption measurement in wet air or high mass flow / velocity applications
- Measurement at compressor outlet possible
- Tube diameters of 1’’ to 10’’. Other diameters on request
- Insertion type, easy installation under pressure through ball valve possible
- High temperature applications up to 200 °C
- No mechanical wear parts
- All parts which are in contact with flow medium are made of stainless steel
Technical data
| Flow range | Refer to Instruction Manual |
| Pressure range | 0 … 1.6 MPa |
| Temperature range | -40 … +200 ºC |
| Accuracy | Flow: 0.5 % F.S. Pressure: 0.5 % F.S. Temperature: 0.5 °C |
| Pipe diameters | DN 25 (1”) up DN 250 (10″) |
| Reference conditions | Programmable, default P =1000 hPa, T = 20 °C |
| Medium | Wet and dry air and non-corrosive gases |
| Output signals | SDI (CS-iTEC specific) 4 … 20 mA and Pulse (optional) Modbus/RTU (optional) MBUS (optional) |
| Medium temp. | -40 °C … +200 ºC |
| Ambient temp. | -20 °C … +60 ºC |
| Operating pressure | 0 … 1.6 MPa |
| Power supply | 24 VDC, 150 mA |
| Display option | 2.4” color graphics display with keypad |
| Process connection | 1/2” G type |
