The material has excellent penetration capability and is able to travel through fine pores, capillaries, hairline cracks, and voids beneath floor finishes under pressure injection application.
Once injected, EGEL reacts within minutes to form a flexible and elastic waterproof gel membrane that effectively blocks water ingress and seals leakage pathways. The cured gel remains highly elastic and adaptable to structural movement, providing long-term waterproofing performance.
Features & Advantages
Excellent Penetration
Low viscosity properties allow the material to penetrate deeply into fine pores, hairline cracks, and
gaps beneath floor tiles and concrete surfaces.
Elastic Waterproof Barrier
Forms a flexible and elastic gel membrane capable of accommodating minor structural movement
and thermal expansion.
Fast Reaction Time
Rapid gel formation upon injection enables quick sealing of water seepage areas and minimizes
downtime.
Non-Hacking Solution
Suitable for waterproofing treatment beneath existing floor tiles without the need for hacking or
removal of finishes.
Strong Waterproofing Performance
Effectively seals water ingress pathways and reduces leakage problems within wet areas.
Good Adhesion
Bonds well within porous substrates and internal voids to create a continuous waterproofing layer.
| Property | Description |
|---|---|
| Material Type | Two-Component Injection Gel |
| Appearance | Transparent / Clear Gel After Curing |
| Application Method | High-Pressure Injection |
| Reaction Type | Fast Gel Formation |
| Elasticity | High Flexibility |
| Water Resistance | Excellent |
| Penetration Ability | High |
| Recommended Usage Area | Toilet, Bathroom, Wet Area, Floor Tile Leakage |
Recommended Applications
- Toilet floor leakage repair
- Balcony waterproofing
- Wet area seepage treatment
- Floor tile leakage rectification
- Concrete pores and hairline crack sealing
- Non-hacking waterproofing system
Application Procedure Summary
- Ensure floor surface is dry before application.
- Drill injection holes along tile joint areas.
- Inject EGEL using two-component high-pressure injection equipment.
- Allow material to penetrate and form elastic gel beneath tiles.
- Seal drilled holes and clean excess material.
| Condition | Estimated Time |
|---|---|
| Initial Gel Formation | ~5 Minutes |
| Light Usage | 3 to 4 Hours |
| Full Stabilization | Subject to site condition |
Storage & Handling
- Store in a cool, dry, and well-ventilated area.
- Keep container tightly sealed when not in use.
- Avoid direct sunlight and moisture contamination.
- Use appropriate personal protective equipment during application.
- Avoid contact with eyes and skin.
- Keep away from children and food areas.
- In case of contact, rinse thoroughly with clean water.
The information contained herein is based on laboratory testing and practical experience. Actual performance may vary depending on substrate condition, site environment, workmanship, and application method. Proper site assessment and application procedures are recommended to achieve optimum performance.
Pricing & Warranty
- Price: RM 1,500 onwards
- Warranty: 8 Years Warranty on EGEL Waterproofing Treatment*
