KLEENSO STAIN REMOVER

APPLICATION:

1. STAIN REMOVER 1L

- REMOVES GREASE & URINE STAIN
- BEST FOR TOILET MOSAIC TILES
- NOT MARBLE, TERRAZO

Test on an inconspicuous area before using, to ensure suitability of the product. Wash the desired surface in small areas (eg 1m x 1m). Wet the surface with water, before applying the solution. Use a brush to gently spread the solution. Leave the solution for 1 minute, before scrubbing the floor. Rinse thoroughly with water after scrubbing. Caution: Use gloves and goggles when using this solution to prevent contact with skin or eyes. If solution comes in contact with skin or eyes, flush with water immediately. Wash hands with soap and water after use. Do not mix with other cleaning solutions or chemicals.

2.CEMENT STAIN REMOVER 1L

- ACID BASED LIQUID MIXTURE
- CLEAN UP HARDENED
- DRIED CEMENT STAINS
- Pour solution onto the surface with cement stains and wait for 15 minutes. Flush with water afterwards. For severe stains, a second application may be necessary.

Pour solution onto the surface with cement stains and wait for 15 minutes. Flush with water afterwards. For severe stains, a second application may be necessary.

3. TILE STAIN REMOVER 1L

- specially formulated for effective removal of stubborn dirt, grease, urinal stain, organic, inorganic sediments on mosaic, floors and toilet (not suitable for marble, terrazzo)

Is specially formulated for effective removal of stubborn dirt, grease, urinal stain, organic, inorganic sediments on mosaic, floors and toilet (not suitable for marble, terrazzo)