Motorcycle After Flood: How to Safely Save It Properly - Super Motor Company

Motorcycle After Flood : How to Safely Save It Properly

Flood are often unavaidable disasters, especially in areas that are prone to flooding. When your motorcycle gets caught in a flood, immediate action is essential to ensure that the damage doesn't become worse. This article will explain in detail the steps you can take to save your motorcycle after it gets submerged in a flood.

Steps to Save a Motorcycle After a Flood

1. Check the Level of Damage Carefully

Once the motorcycle is in a dry place, check the engine oil level carefully. Check to see how much water motorcycle has been submerged in. If the water only reaches the bottom of the engine, the damage may be minimal. However, if it is completely submerged, you should be prepared for a more thorough inspection.

Also, check to see if any important parts of the motorcycle have been soaked with mud or water. Be sure to carefully check the chain, brakes, exhaust, and all parts of the motorcycle.

2. Do Not Try to Start the Engine

Avoid starting the engine immediately after flooding. Water may have entered system and attempting to start it could cause serious damage such as engine lockup.

3. Dry the Electrical Components

Electrical components such as batteries, spark plugs, and cables should be completely dry before use. Use a clean cloth to absorb moisture or leave to dry in the sun to ensure all components are completely dry.

4. Change Lubricating Oil and Air Filter

Water entering the engine can contaminate the lubricating oil and air filter. Replace the lubricating oil immediately. In addition, check the air filter and replace it if necessary, as mud can clog the air passages and prevent internal damage.

5. Send it to a Professional Mechanic to Get an Inspection

The final step is to take your motorcycle to a workshop for a further inspection. Even if you have done the initial inspection, it is still best to take your motorcycle to a workshop for a more detailed inspection. A professional mechanic can ensure that all parts of the motorcycle, including the brakes and suspension, are in good condition and that there are no hidden damages, especially on the internal parts of the engine.

6. Perform Post-Flood Maintenance

After your motorcycle is repaired, make sure to perform regular maintenance. This includes lubricating the chain, checking tire pressure, and servicing the engine to ensure that performance remains optimal.

Dealing with a flood-damaged motorcycle may seem daunting, but by following the steps above, you can reduce the risk of serious damage to your motorcycle after a flood and also save on repair costs. Make sure you act quickly to avoid more costly damage in the future. Remember, prevention is better than cure!

Flooding can be dangerous for your motorcycle, but quick action and proper maintenance can save your investment.

Full Name *
Email *
Contact Number *
Company Name
Company Address
Subject *
How can we help you? *