YGGS WORLD SDN. BHD. (841230-U)
NC10KV Electrical Insulating Mats
NC20KV Electrical Insulating Mats
NC30KV Electrical Insulating Mats
NC50KV Electrical Insulating Mats
Electrical Insulation Mat • Insulating Mats • Electrical Rubber Mat • Electrical Switchboard Matting •
Non Conductive Switchboard Mat • Switchboard Rubber Mat • Corrugated Switchboard Mats •
Diamond Plate Switchboard Mats • High Voltage Insulation Rubber Mat • Electrical Safety Matting •
Switchboard Matting • Substation Rubber Mat • Non Conductive Mat • Dielectric Rubber Mat • Switchgear Matting
~   Roll Form
Insulating Mat – Ecoformat
Ecoformat – NC10KV/NC20KV/NC30KV/NC50KV Electrical Insulation Mat ( Corrugated Switchboard Mats /
Diamond Plate Switchboard Mats / Non Conductive Switchboard Mat ) was test under by TNB Labs Sdn Bhd & SGS,
complied and passed under below requirement.
TNB LABS SDN BHD TEST CERTIFICATES (4nos) :
1) IEC 61111:2009 - Cert. No: TNBR/HVLT-2019-08/001 For NC10KV Electrical Insulating Mats Class 0 Withstand Voltage (10kV)
2) IEC 61111:2009 - Cert. No: TNBR/HVLT-2019-10/006 For NC20KV Electrical Insulating Mats Class 1 Withstand Voltage (20kV)
3) IEC 61111:2009 - Cert. No: TNBR/HVLT-2019-09/001 For NC30KV Electrical Insulating Mats Class 2 Withstand Voltage (30kV)
4) IEC 61111:2009 - Cert. No: TNBR/HVLT-2019-09/002 For NC50KV Electrical Insulating Mats Class 4 Withstand Voltage (50kV)
SGS TEST CERTIFICATES (1nos) :
* SGS is the world's leading inspection, verification, testing and certification company.
SGS recognized as the global benchmark for quality and integrity.
1) ASTM D635-14 Flammability Test - This product pass the flammability (Horizontal Burning)
		Not spreading fire when ignited or under high temperature.
		Certificate No: SZIN1908011494PS
• Switchboard Rubber Mat are manufactured as per the latest IEC 61111:2009 Live Working standard.
• Electrical Switchboard Matting are used as floor coverings in areas of high voltage applications for the safety of users
from dangerous electrical shock.
• Substation Rubber Mat are flame-retardant.
• Most of these Electrical Safety Matting have an anti-slip surface.
CLASS IDENTIFICATION
Model No.	Size	Color	Surface Design	Matting Class IEC 61111:2009 Withstand Voltage	Dielectric Test Voltage	Nominal Maximum Use Voltage
NC10KV (Low Voltage)	5mm x 1m x 10m	Black	Diamond Plate	Class 0	10,000 V	1,000 V AC
NC20KV	9mm x 1m x 6m	Black	Corrugated	Class 1	20,000 V	7,500 V AC
NC30KV	8mm x 1m x 6m	Grey	Corrugated	Class 2	30,000 V	17,000 V AC
NC50KV	12mm x 1m x 6m	Grey	Plain	Class 4	50,000 V	36,000 V AC
Material Type: Natural Rubber ( NR, SBR )
Specific Gravity: ± 1.6g/cm3
Hardness: 65 ± 5 Shore-A
Elongation: ± 280%
Tensile Strength: ± 4 Mpa