1mm thick, medium duty, self-leveling epoxy floor system with smooth finish.
1mm Self-leveling Epoxy Floor System – Smooth
A 1mm thick, medium duty, self-leveling epoxy system finished smooth.
Uses
Suitable for medium duty applications in all industries in clean rooms, laboratories, packing areas, assembly areas and light manufacturing areas in pharmaceutical plants, dry food manufacturing plants, wafer fabrication plants, electronics and computer manufacturing.Benefits
- Solventless system.
- Chemical resistance.
- High gloss hygienic finish.
- Withstands light forklift traffic.
Application
Substrate Requirements / Preparation
- Concrete floor must be waterproofed and graded to specified levels and falls.
- Concrete floor shall be cured for minimum twenty-one (21) days.
- Chip off all cement droppings and cement overpours.
- Degrease oil/grease contaminants with industrial degreaser.
- Shotblast surfaces to achieve suitable surface profile.
- Remove dust with industrial vacuum prior to application of coating.
Products contain epoxy resin and amines. Do not take internally. May irritate eyes and skin. Protective clothing and gloves are recommended to prevent sensitization to these materials. In case of eye contact, flush with soap and clean water and seek medical attention.
Application Procedures
- Apply Polygard EP826 epoxy scratch coat and allow to dry for a minimum of six (6) hours.
- Apply Polygard EP826 epoxy grout coat and allow to dry for minimum of six (6) hours.
- Sand down surfaces to remove surface imperfections.
- Apply Polygard EP822 epoxy self-leveling finish, thoroughly spike rolled to release entrapped air.
- Allow twenty-four (24) hours drying time before opening to light foot traffic and seven (7) days for chemical service conditions.
ECOGARD® SLT 1020 Floor System should be applied by specialist applicators. Technical advice or assistance on suitability of system for specific application and end-user requirements are available from POLYMER INTERNATIONAL HOLDING PTE LTD. Individual Product Data Sheets are available upon request.
The statement provided concerning the materials shown are intended solely as a general guide for material usage and are believed to be true and accurate. Since the manner of use is beyond our control, POLYMER INTERNATIONAL HOLDING does not make nor does it authorize anyone to make any warranty of merchant ability or fitness for any purpose or any other warranty, guarantee or representation, express or implied, concerning this material except that it conforms to POLYMER INTERNATIONAL HOLDING product sample. Buyer and user except the product under these conditions and assume the risk of any failure, injury of person or property and loss or liability resulting from the handling, storage or use of the product, whether or not handled, stored or used in accordance with directions or specification. Under no circumstances shall POLYMER INTERNATIONAL HOLDING be liable for consequential or incidental damages arising from any breach of warranty. In all cases, POLYMER INTERNATIONAL HOLDING liability is limited, at POLYMER INTERNATIONAL HOLDING option, to the replacement of goods or their value, proven to be defective in manufacturing.
US 7315 
BR 2798 
VN 1734 
AU 1564 
TH 1455 
JP 1388 
SG 1141 
MY 1079 
