Introduction
3Wire RS2S2 is a high-performance RS-485 hub designed for use in environments with complex electromagnetic interference. It supports data transmission rates of up to 115.2 kbps.To ensure safe and reliable communication, RS2S2 incorporates optoelectronic isolation technology along with 600W surge protection.
The built-in optoisolator provides up to 2,500V isolation, offering strong protection against lightning surges and ESD.
Features
- External SMPS power supply, which eliminates common ground interference and enhances suitability for outdoor applications.
- Automatic data direction control for RS-485 communication, allowing the device to detect data flow direction and switch accordingly.
- Effectively solves RS-485 communication time delay issues.
Specification
| Standards | : | RS-485 (EIA/TIA compliant) |
| Interface | : | RS-485 Input: 4-pin terminal block RS-485 Output: 6-pin terminal block |
| Transmission Media | : | Twisted-pair or shielded cable |
| Communication Mode | : | Asynchronous half-duplex |
| Power Supply | : | 9–40V DC, 500mA |
| Indicators | : | LED status indicators for Power (PWR), Transmit (TXD), and Receive (RXD) |
| Isolation Voltage | : | 2,500V RMS 500V DC (with DC/DC isolation module) |
| Baud Rate | : | 300 bps to 115.2 kbps |
| Protection Features | : | 600W lightning and surge protection per RS-485 line ±15kV ESD protection |
| Transmission Distance | : | 0 to 3,000 meters (dependent on baud rate: 115.2 kbps to 300 bps) |
| Dimensions | : | 80 × 50 × 31 mm |
| Operating Environment | : | Temperature: –40°C to +85°C Relative Humidity: 5% to 95% (non-condensing) |
CLICK TO DOWNLOAD DATASHEET
US 24664 
BR 21589 
GB 13686 
CA 10712 
AU 10321 
IN 7012 
VN 6312 
IE 4951 
