PRODUCT DESCRIPTION
-ANSHIN SUSPENSION PART
- JAPAN QUALITY
-100% AUTHENTIC AND ORIGINAL ANSHIN PRODUCT
-MADE FROM HIGH QUALITY RUBBER
-PREMIUM QUALITY AND OEM STANDARD
-12 MONTHS WARRANTY

PART NUMBER
DRIVER-PEA-48068-BZ260/PEA-48068-BZ261
PASSANGER-PEA-48069-BZ260/PEA-48069-BZ261

MODEL:
1.PERODUA MYVI 2005-2008 D73A 1.3
2.PERODUA MYVI 2011-2013 LAGIBEST D54T 1.3/1.5
3.PERODUA MYVI 2015-2017 ICON D95A 1.3/1.5

In automotive suspension, a control arm, also known as an A-arm, is a hinged suspension link between the chassis and the suspension upright or hub that carries the wheel.

The inboard (chassis) end of a control arm is attached by a single pivot, usually a rubber bushing. It can thus control the position of the outboard end in only a single degree of freedom, maintaining the radial distance from the inboard mount. Although not deliberately free to move, the single bushing does not control the arm from moving back and forth; this motion is constrained by a separate link or radius rod.

This is in contrast to the wishbone. Wishbones are triangular and have two widely spaced inboard bearings. These constrain the outboard end of the wishbone from moving back and forth, controlling two degrees of freedom, and without requiring additional links.

Most control arms form the lower link of a suspension. A few designs use them as the upper link, usually with a lower wishbone. The additional radius rod is then attached to the upper arm.