The TP-Link VIGI SP9030 is an intelligent solar power supply system with a 90W solar panel and a 30Ah/10.8V lithium battery (≈324Wh). It’s designed to power 1–2 surveillance devices (like a single 4G camera or AP) in remote or off-grid environments, with up to 8.5 days backup under light load.
� VIGI SP9030 – Product Details
| Feature | Specification |
|---|---|
| Solar Panel | 90W photovoltaic panel (998 × 516 × 30 mm) |
| Battery | 30Ah / 10.8V lithium battery (≈324Wh capacity, >500 cycles) |
| Output Ports | 3 × DC voltage outputs (9–12.6V/2A) |
| Charging Controller | MPPT (Maximum Power Point Tracking) |
| Backup Duration | Up to 8.5 days on light load (e.g., 1 camera) |
| On-load Charge (Sunny Days) | ~1.5 days |
| Weatherproofing | IP66-rated for outdoor deployment |
| Mounting Angles | Adjustable: 5°, 15°, 25°, 35°, 45°, 55° |
| Smart Features | Intelligent auxiliary heating, independent protection circuit |
| Remote Management | Supports remote monitoring and troubleshooting |
| Operating Temperature | Charging: -20°C to 45°C; Discharging: -30°C to 60°C |
Deployment Use Cases
Thong, the SP9030 is best suited for:
- Guard posts or single camera setups → e.g., 1 × VIGI 4G camera at a rural petrol pump.
- Wireless bridges → powering a single AP or bridge in hilly terrain.
- Temporary monitoring points → small construction zones or container cabins needing 1–2 devices.
Practical Limitation
- Not enough for 4 cameras + AP → At ~52W load, the 324Wh battery lasts only ~6 hours without sun.
- For larger deployments (like your 4 × S345ZI + 1 × EAP650-Outdoor), you’ll need SP18090 or multiple SP9030 units.
BR 14774 
VN 11088 
US 4954 
AR 2540 
IQ 1780 
MX 1561 
RU 1269 
ZA 1235 
