HIOKI 9660 Clamp On Sensor

HIOKI 9660 Clamp On Sensor
For measuring load current, voltage output sensor 100 A AC
 

---

OVERVIEW

Hioki current sensors are best-in-class devices for use with power meters and PQAs. The 9660 is a 100A AC clamp sensor with voltage output for measuring load current.

CAT III 300V

Key Features

• For inverter devices or commercial power lines
• Fits in narrow spaces due to compact design

Model No. (Order Code)

9660	Clamp On Sensor. For the PW3360/65, 3169, PW3198 and similar products

Note: Supports power quality analyzers, power meters and other data acquisition equipment with voltage input
 

---

SPECIFICATIONS

Basic specifications
Accuracy guaranteed: 1 year
 

Rated measurement current	100 A AC
Max. measurement current	Continuous 130 A (45 to 66 Hz)
Output rate	1 mV AC/ A
Amplitude accuracy (45 to 66 Hz)	±0.3 % rdg. ±0.02 % f.s.
Phase accuracy	±1° (45 Hz to 5 kHz)
Amplitude frequency characteristics	Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy)
Max. rated voltage to earth	300 V AC rms or less
Measurable conductor diameter	φ 15 mm (0.59 in) or less
Operating temperature and humidity	0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
Dustproofness and waterproofness	N/A
Dimensions and mass	46 mm (1.81 in)W × 135 mm (5.31 in)H × 21 mm (0.83 in)D, 230 g (8.1 oz) Cord length 3 m (9.84 ft), Output terminal: BNC