SCHUNK Parallel Gripper - DPG-Plus (Sealed Universal Gripper)

- Dense 2-finger parallel gripper that meets the requirements of IP67 and does not allow substances to enter the working environment

- Protection class IP 67

 

Field of application

The gripper is ideally suitable for handling of rough or dirty workpieces. Its field of application extends from the loading and unloading of machines, such as in the case of sanitary blocks, grinding machines, lathes or milling machines, to handling tasks in painting plants, in powder-processing or underwater.

 

Advantages – Your benefits

Robust interior multi-tooth guidance

for the precise handling of different workpieces

Lip seal at the outside round guidance

for permanent, secure gripper sealing

High maximum moments possible

suitable for using long gripper fingers

Sealed 2-Finger Parallel Gripper

complies to IP67 requirements despite a high moment load

Drive concept oval piston

for maximum gripping forces

Mounting from two sides in three screw directions

for universal and flexible gripper assembly

Air supply via hose-free direct connection or screw connections

for flexible pressure supply in all automated systems

Compact dimensions

for minimal interfering contours in handling

 

Options and special information

Gripping force maintenance version AS/IS

The mechanical gripping force maintenance version ensures minimum gripping force even in the event of a pressure drop. In the AS/S version this acts as a closing force, in the IS version as an opening force.

Power booster version KVZ

if higher gripping forces are required

ATEX version EX

for explosive environments

Additional versions

Various options can be combined with each other. Numerous additional options are also available – just tell us what your task is!

Integrated air purge connection

impedes the ingress of dirt into the inside of the gripper

 

Please note that to achieve an IP 67 protection class, the gripper requires an additional hose for ventilation or a switchable air purge connection. For detailed information, please refer to the assembly and operating manual. Alternatively, a sinter filter (supplied) mounted on the air purge connection can prevent the penetration of dirt particles > 0.12 mm. However, this reduces the protection class to IP 54.