1.CERTIFIED AUTHORISED DEALER 

2.FOR DELIVERY KLANG VALLEY AREA WE USE OUR OWN LORRY TRANSPORT.

3.INSTALLATION SERVICE COVERAGE KLANG VALLEY ONLY.

PRODUCT DESCRIPTION

FEATURES

 :HEALTH
- SMART CLEAN, PROVIDING HEALTHIER AIR, HIGH EFFICIENCY FILTER(OPTIONAL), PM2.5 FILTER & STERILIZATION MODULE(OPTIONAL)

 :ENERGY SAVING
- DC FAN MOTOR, NEW HEAT EXCHANGER DESIGN

 :COMFORT
- FLAP IS CLOSED WHEN AIR COND IS CLOSED, 'SPIRAL PANEL, HIDDEN LED DISPLAY, SUPER BIG INLET GRILLE, ABS MATERIAL PANEL, BRAND-NEW DESIGN FAN

 :COMFORT
- FAN SPEED PROGRAMME, HIGH CEILLING MODE, ROUND WAY AIR SUPPLY, INDIVIDUAL FLAP CONTROL

 :SMART
- INTELLIGENT SENSOR > ABSENCE MODE, AUTOMATIC AIRFLOW DIRECTION

 :CONVENIENCE 
- SQUARE HANGER, DISMANTLING ONLY 1 SCREW, CONVENIENT CLIP, HIGH LIFT-UP DRAIN PUMP

SPECIFICATIONS

AB35S2SC2FA/1U35S1PM1SA
 - Cooling capacity : 12,000 btu/h / 3500 kw
 - Dimension(indoor WxDxH) : 570mm x 570mm x 260mm
 - Controller(standard) : YL-HBS01
 - Panel mode (model): PB-620KB
 - Dimension(WxDxH) : 620mm x 620mm x 60mm
 - Dimension(outdoor WxDxH) : 800mm x 275mm x 553mm

AB50S2SC2FA/1U50S1PJ1SA
 - Cooling capacity : 17,000 btu/h / 5000 kw
 - Dimension(indoor WxDxH) : 570mm x 570mm x 260mm
 - Controller(standard) :YL-HBS01
 - Panel mode (model): PB-620KB
 - Dimension(WxDxH) : 620mm x 620mm x 60mm
 - Dimension(outdoor WxDxH) : 820mm x 338mm x 614mm

AB71S2SG1FA/1U71S1PJ1SA
 - Cooling capacity : 25000 btu/h / 7300 kw
 - Dimension(indoor WxDxH) : 840mm x 840mm x 204mm
 - Controller(standard) :YL-HBS01
 - Panel mode (model): PB-950KB
 - Dimension(WxDxH) : 950mm x 950mm x 50mm
 - Dimension(outdoor WxDxH) : 820mm x 338mm x 614mm

ABH090H1ERG/1U90S1PS2SA
 - Cooling capacity : 30000 btu/h / 9000 kw
 - Dimension(indoor WxDxH) : 840mm x 840mm x 246mm
 - Controller(standard) :YL-HBS01
 - Panel mode (model): PB-950KB
 - Dimension(WxDxH) : 950mm x 950mm x 50mm
 - Dimension(outdoor WxDxH) : 920mm x 372mm x 760mm

ABH105H1ERG/1U105S1PS1SA
 - Cooling capacity : 36000 btu/h / 10500 kw
 - Dimension(indoor WxDxH) : 840mm x 840mm x 246mm
 - Controller(standard) :YL-HBS01
 - Panel mode (model): PB-950KB
 - Dimension(WxDxH) : 950mm x 950mm x 50mm
 - Dimension(outdoor WxDxH) : 950mm x 372mm x 760mm

ABH125K1ERG/1U125S1PN1SB
 - Cooling capacity : 42600 btu/h / 12500 kw
 - Dimension(indoor WxDxH) : 840mm x 840mm x 288mm
 - Controller(standard) :YL-HBS01
 - Panel mode (model): PB-950KB
 - Dimension(WxDxH) : 950mm x 950mm x 50mm
 - Dimension(outdoor WxDxH) : 950mm x 370mm x 965mm

ABH140K1ERG/1U140S1PN1SB
 - Cooling capacity : 48000 btu/h / 14000 kw
 - Dimension(indoor WxDxH) : 840mm x 840mm x 288mm
 - Controller(standard) :YL-HBS01
 - Panel mode (model): PB-950KB
 - Dimension(WxDxH) : 950mm x 950mm x 50mm
 - Dimension(outdoor WxDxH) : 950mm x 370mm x 965mm


[Standard Installation (PWP Installation) includes ]
Within 8’ feets Copper Piping with insulation,
within 8' feets 3core control wire from indoor to outdoor unit.
Drainage Pipe (UPVC)  15mm x 10 feets
Standard MS outdoor Bracket. 
1 Month workmanship warranty For Water Leaking and Gas Leaking.

[ Additional Copper  Pipe Charges ]
If you need to place the outdoor unit a bit far from the indoor unit, the additional cost for copper pipe with wire which is more than 10’ feets  as below :
1.0HP   RM 20.00/ft
1.5HP   RM 22.00/ft   
2.0HP   RM 24.00/ft
2.5HP   RM 26.00/ft
3.0HP   RM 28.00/ft
3.5HP   RM 30.00/ft
4.0HP   RM 30.00/ft
5.0HP   RM 30.00/ft

If there is no power point, the installation for the power point charges as below :

[ OPTIONAL ]
Add Tapping Wiring Point from nearest socket switches.RM 120.00/unit & RM 160.00/unit (2.0HP  above)

Additional On/Off Air cond Switches.                                                     RM60.00/unit 

Wiring Power Point from DB switchboard  to Air cond UnitRM250 - RM350.00/unit (Depends on Site Condition)

[ OPTIONAL ] 
Add 1" inch PVC wiring casing= RM10.00/pcs                                          

Add 15mm x 10 feets  PVC drain pipe with insulation= RM15.00/pcs.

Add 2”x 3” x 6' feets PVC trunking for covered copper pipe= RM  60.00/pcs

[ Old Unit Dismantling Service ]
- If there is a old or defective air cond need to be dismantled first, before install the new cassette air cond unit, the dismantling service charge is RM120.(Cassette type)
 
[ Before Order please read & Agree to the Standard PWP installation Terms & Conditions. ]

[ Installation Coverage Area ]
- Ampang - Bangi - Cheras - Cyberjaya - Gombak - Kajang - Klang - Kuala Lumpur - Petaling Jaya - Puchong - Putrajaya 
- Selayang - Serdang - Seri Semenyih - Shah Alam