Brand: Honda Electronics
Model: ZO-41
Features:
- An ultrasonic cutter using 40,000 ultrasonic vibrations per second with non-audible sound to assist in reducing the friction during the cutting process.
- The latest version of Honda Electronics Ultrasonic Cutter. The new ZO-41 includes the following improvements:
- All the enhancements of the ZO-40 plus:
- The AC adapter makes this unit plug-in and uses worldwide.
- Continued compatibility with most blades across the full line of Ultrasonic Cutters.
- TAF circuit to enhance the cutting consistency especially with hard to cut materials.
- Locked “ON” activation switch – 10-minute operation.
- Switchable between NORMAL and HIGH Power for difficult to cut materials (5-minute operation).
| Model | ZO-41 | |
| Oscillation | TAF circuit (automatic frequency control) | |
| Oscillation frequency | 40 kHz | |
| Maximum Output | 30 W | |
| Maximum power consumption | 40 W | |
|
Power source (AC adaptor) |
Input: AC 100 - 240V , 50/60 Hz, 80 VA Output: DC 12V, 3.5A |
|
|
Dimension WｘDxH mm |
Transmitter | 173ｘ89ｘ76 (Not including protrusion) |
| Hand-Piece | D=32 x L=144 (excluding blade) | |
| Weight | Transmitter (Body) | Approx. 260g |
| Hand-Piece | About 700g (including output cord) | |
| Temperature | 5 °C ∼ 45°C | |
| Circuit Protection |
Over-temperature thermostat circuit Thermal shutdown if temperature is above 70°C Pressure switch if excessive force is exerted on blade. |
|
| Power Cord | 1.4m | |
| Output Cord | 1.6 cm (Straight cord) | |
