The optibelt ATC-SYSTEM is a patented system solution and comprises an extruded polyurethane timing belt. With its impressed ATC recesses, it offers a cost-effective solution in flexible systems.
The user of the ATC-SYSTEM can fasten screw-on cleats quickly and easily to a freely selectable tooth, on the spot. The connection can be fastened and detached directly by the user. As a result,varying forms of transported goods can be conveyed on the same drive and base belt using different screw-on cleats. With detachable cleat fastenings, the costs for stock-keeping of wear and spare parts can be reduced.
ATC inserts also make it possible to screw parts on directly, such as highly precise metal workpiece carriers, without using welded-on, specially manufactured cleats with inserts. Furthermore, screw-on cleats can transmit higher forces in comparison to permanently connected cleats. In addition, a smaller minimum pulley diameter can be chosen for the same fastening strength. Screw-on cleats for the ATC-SYSTEM are available on request.
With the ATC-System, an ATC-IN insert for screwing on the cleat is laid into the prepared recess in the tooth. In the optibelt ALPHA V timing belt, these recesses are consistently available in all teeth in profiles ATC10 and ATC20.
ATC-IN inserts are available in the material qualities stainless steel and zinc (ATC20 only stainless steel) in packaging units á 10, 25 or 100 pieces (ATC20 not in 100).
The assignment to belt profiles and properties can be found in the optibelt ATC-SYSTEM brochure.
| Profile and Width mm | |
|---|---|
| ATC10 | 25, 32, 50, 75, 100, 150 |
| ATC10K6 | 50, 100 |
| ATC20 | 50, 100, 150 |
| Minimum length as welded ALPHA V | |
|---|---|
| ATC10 | 850mm to 1150mm (width dependent) |
| ATC20 | 1060mm to 1160mm (width dependent) |
| Roll length | |
|---|---|
| optibelt ALPHA LINEAR | 50m or 100m |
| ATC-IN | Suitable for | |
|---|---|
| M4-14RF, M4-14ZN | ATC10 b= 25, 32, 75 |
| M4-25RF, M4-25ZN | ATC10 / ATC10K6 b=50, 100, 150 |
| M5-25RF | ATC20 b=50, 100, 150 |
