Capacitance	Yes
RPM	EEDMRPMG (opt.)
Low Pass Filter (LPF)	No
Case or Zipper Pouch	EEDM504B4
Replacement Fuses	EEDM5O4B1 EEDM504B2
Adjustable Trigger Level	No
Temperature	EEDM506C (opt.)
AC Volts	750
Basic DC Accuracy, %	0.50
Micro Amps	Yes
Country Of Origin	KOR
Dimensions, inches	7-3/4 x 3-3/4 x 1-1/2
Noise Reduction Circuit	No
mS Pulse Width	No
CAT Rating	CATII 750 V AC, CATII 1,000 V DC, CATIII 600 V AC/DC
Backlight	No
Auto Shut-off	Yes
Test Leads	EEDM504B3
Certificate of Calibration Model	EEDM504DCRTâ€
DC Amps	10
UL® Listed	cULus 61010-1
Glitch Capture	No
Insulation Test	No
Analog Bar Graph	Yes
Resistance, ohms	40M
Data Hold	Yes
Auto Range	Yes
Duty/Dwell	Duty Only
True RMS (Root Mean Square)	No
AC Amps	10
Display Count	4,000
Blown Fuse Identifier	Yes
Comp. Output (USB)	No
Min/Max	Yes
DC Volts	1,000
Easy Open Battery and Fuse Door	Yes
Color Screen	No
Frequency	Yes

Features

• LCD Display - 4,000 count with 42-segment bar graph
• REC (Record Mode) - Store minimum and maximum readings over a measurement period
• AC/DC—Manually select AC or DC measurement function
• Continuity Buzzer and Diode Test—Toggle between continuity buzzer or diode test on Ohm function
• RANGE—Manually select the appropriate range
• LCD Display—4,000 count with 42 segment bar graph
• Continuity Buzzer and Diode Test—Toggle between continuity buzzer or diode test on ohm function
• HIGH RESOLUTION DCmV RANGE—Additional 40 millivolt range with 0.01mV resolution for improved accuracy when performing low voltage measurements
• ACV (AC Volts)—Measure the voltage of ABS wheel sensors
• DCV (DC Volts)—Measure the voltage of circuits and sensors
• Hz/Duty (Duty Cycle)—Measure in percent the ON time of sensors or other devices
• REL (Relative Mode)—Factor out lead resistance for improved low ohm measurements or compare readings to a known standard. Can also be used for differential measurements
• HOLD—Lock the reading on the display for hard to read locations for future reference
• OHMS/RESISTANCE—Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring
• AC/DC Current Functions (Amps)—Measure the parasitic draw from the battery with ignition off
• Hz (FREQUENCY)—Measure the frequency of sensors and signals
• CAP (Capacitance)—Measure the capacitance of condensers or capacitors found in today's hybrid automobiles
• TILT STAND—Is built into the instrument housing
• SEPARATE FUSE/BATTERY COMPARTMENT—Is easily removed for battery/fuse replacement
• Fuses are labeled with replacement number
• Seven-year limited warranty
• Technical and Service Hot Line: 1-888-382-6522
• Manually select AC or DC measurement function
• AC/DC Current functions: measure the parasitic draw from the battery with ignition off