AP 1P
TWEETER COMPONENT
The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter component provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The double Neodymium tablet used in the motor provides an excellent extension in high frequency and together with the 1” CCAW voice coil ensures an outstanding dynamic response.
AIF technology, to support OEM integration, provides the specialist with three different types of faceplates:
1. OEM, for an easy and correct factory placement
2. Mesh grille: to obtain the best compromise between protection and performance with a-pillar installations
3. Spoke grille: for maximum acoustic performance with a-pillar installations
Thanks to the AIF, the AP 1P tweeter expresses its full potential in every application scenario. It is supplied with three mounting accessories that make the AP 1P install a breeze:
1. Watch band
2. Double-angle cup
3. Flush Mounting Ring
4. Metal mounting spring
Docs
Technical Data
TWEETER COMPONENT
The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter component provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The double Neodymium tablet used in the motor provides an excellent extension in high frequency and together with the 1” CCAW voice coil ensures an outstanding dynamic response.
AIF technology, to support OEM integration, provides the specialist with three different types of faceplates:
1. OEM, for an easy and correct factory placement
2. Mesh grille: to obtain the best compromise between protection and performance with a-pillar installations
3. Spoke grille: for maximum acoustic performance with a-pillar installations
Thanks to the AIF, the AP 1P tweeter expresses its full potential in every application scenario. It is supplied with three mounting accessories that make the AP 1P install a breeze:
1. Watch band
2. Double-angle cup
3. Flush Mounting Ring
4. Metal mounting spring
Docs
Technical Data
| Comp | Tweeter |
| Size | 29 mm (1.14″) |
| Power Handling | Hi-pass filtered 2.5 kHz @ 12 dB Oct. 150 W Peak Power |
| Impedance | 8 Ω |
| Frequency Response | 1,2 ÷ 25 kHz |
| Crossover name | APCX P 2T |
| Crossover Type | High Pass, 4kHz, 12 dB/oct. |
| Crossover adjustment | Tweeter Level: 0 / +3 dB |
| Sensitivity | 92 dB/Spl |
| Magnet | Neodymium |
| Tweeter Voice Coil Ø | 25 mm (1″) |
| Dome | Tetolon fibre |
US 28257 
BR 23228 
GB 13588 
CA 10214 
AU 9818 
IN 6922 
IE 4607 
NZ 4489 
