POLYURETHANES (FOAM REBONDING GLUE)
| Product Code | TROPHY288 POLYURETHANES | ||||||||||||||||||
| Product Description | Polyurethane (foam rebonding glue) | ||||||||||||||||||
| Product Application | TROPHY288 POLYURETHANES is a foam rebonding glue for foam scrap become rebond foam with hardness and good tensile. | ||||||||||||||||||
| Material Specification |
|
||||||||||||||||||
| Method of use | |||||||||||||||||||
|
Depend on the granular size, adding 7 -15% by weight TROPHY388 POLYURETHANES to granular. After fully mixing, pour into mold. Open time recommendation 10 – 15 minutes at 25ºc. Depend on the temperature, pressure and moisture, demand time will be 30 – 50 minutes.
The information and data contained herein are believed to be correct. However, no liability is accepted. We preserve the right of revision for this information sheet.
|
|||||||||||||||||||
| Storage | |||||||||||||||||||
|
TROPHY288 POLYURETHANES is sensitive to humidity and should therefore at all times be kept in airtight drums.
Absorption of moisture leads to the formation of insoluble products (skin formation). When kept are the proper storage temperature of 30±5 ºc in airtight drums the material has a shelf life of 6 months.
|
|||||||||||||||||||
| Safety Precautions | |||||||||||||||||||
|
The place of work should be well ventilated. For the handling of TROPHY288 POLYURETHANES safety goggles and gloves should be worn.
Skin contact with the material should be avoided. Any splashes on the skin should be washed off immediately with soap and water. Should TROPHY288 POLYURETHANES components get into eyes, they should at once be rinsed our thoroughly with water and an optician consulted.
|
|||||||||||||||||||
|
Packaging - 220KG fixed – lid drums
|
|||||||||||||||||||
US 1300 
MY 944 
CN 267 
AP 168 
GB 91 
AU 89 
IE 87 
DE 82 
