Selangor,Kuala Lumpur (KL),Petaling Jaya GEPON OLT – 2 port PON expansion card GEPON Optical Line Terminals (OLT) - FTTX Access

Description

AN-OLT8000-2PON PON expansion card can be used as one of 4 available expansion slot module for AD-Net GEPON series modular OLT unit AN-E-OLT8000

AN-E-OLT8000 has 4 free slots for this module. Such scenarion, built by AD-net’s R&D group allows operator flexible pay as you grow approach for building the the new generation EPON/GEPON access networks with future oriented FTTx approach.

Start build the network with initial investment in AN-E-OLT8000, and add up to 8 PON uplinks in total – that’s the approach that offers the least CAPEX at starting network development phase.

In GEPON system, installed in OLT, this card is responsible for registering ONU’s, transfering Ethernet packets received from network in downlink to EPON optical signal over the ODN – Optical Distribution network down to ONU’s and vice versa.

Each PON card have 2 PON uplinks, each with a speed of 1.25G. Usually each PON have 32 ONU’s as max connected, but 1:64 splits are also possible with this card. Core of PON modules are composed by highly integrated OLT chips and independent control modules.

Features

1 Gbps transmission rate
Network reach: 20 km
Transmitter power: 2.5dbm to 7 dbm
Receiver sensitivity: <=-39dBm
Security: ONU authentication
Distance 20 km
Max 64 ONUs support per PON expansion module
Supports 802.3 MPCP protocol;
Supports 802.3 OAM and expanded (slave port) protocol, have abundant OAM function design and offers long distance managment through OLT.
Double channel independent OLT;
Remote software upgrade supported
Data encryption service for downlink, secure data transtion security for end users
ONU authentication, averts illegal ONU access to network
DBA dynamic bandwidth allocation
Single ONU multi LLID registration
IGMP proxy supported
ACL functions supported
QoS dunctions supported
4K MAC adress with single channel OLT
VLAN’s devided by LLID
Loads of various statistic information
Hot swap possibility for cards

Specifications

Operation Environment
Temperature: -5°C ~ 70°C
Humidity: 10% ~ 90%, non-condensing
Weight 1.5 kg

Ordering Information

AN-8000-2PON

2 PON uplink card, with 2 slots for AN-1000BASE-PX-20 modules. Each chassis can have up to 4 such cards, so full configuration of 8 ports are achieved.

Your Name *
Your Company Name
Your Email *
Your Contact Number *
Subject *
Message *
Captcha *

Full Name *
Email *
Contact Number *
Company Name
Company Address
Subject *
How can we help you? *