Selangor,Kuala Lumpur (KL),Petaling Jaya DS3 T3 Fiber Modem / Extender / Converter STM1/E3/DS3/T3 Fiber Mux Series - Fiber Optical Multiplexers

Description

AN-DS3 modem / converter / extender can be used to provide 44.736M (T3) signal conversion between electrical interface and optical interface of DS3 / TS3 based network interface. It conforms to the ITU- T G.703 T3 recommendation. The converter features compactness, light weight, low power consumption and high reliability.

The 45M optical / electrical converter operates on 1310 nm lasers, with a typical transmission distance of 40 km over single mode optical fibers. For longer hops, 1550 nm lasers can be selected for 100 km and more distances. WDM single fiber single strand also is available on request.

Exterior power supply, all the functional blocks are integrated on a single PC board, which makes the converter compact and reliable. 220 V AC or – 48 V DC power options are available by selecting an appropriate plug-in power unit.

AN-DS3 electrical interfaces are BNC sockets, “IN” is incoming T3 electrical signal and “OUT” is outgoing T3 electrical signal. The optical interfaces are SC type sockets using receive and transmit integral whole mold piece.

Features

High reliability, comply to all relevant standards.
Single Fiber Bi-Directional is selectable.
State-of-the-art design, ensure normal working under different environment.
Supports local and remote loop – back on electrical or optical interface for system diagnostic.
Suitable for DS3/T3 interface interconnection.
Simple operation and maintenance.
Compact design and low power consumption.

Specifications

Optical interface

Connector: SC – using receive and transmit integral whole mold piece.

Wavelength: 1.31μｍ(typical), with a typical transmission distance of 40 km

over single mode optical fibers,

1550 nm for up to 100 km

Electrical interface

Comply with ITU-T G.703 T3 recommendation

Bit rate: 44.736Mbit/s

Impedance: 75 ohm (unbalanced)

Power

DC type: –48V（–36V to –60V）

AC type: ~220V（176V~265V）

Power consumption:<3W

Working environment

Temperature: 0 ~50°C

Humidity: ≤90% non condensing 1.5.

Dimension

Width: 205mm

Height: 46mm

Depth: 135mm

Application scenario:

Ordering Information

AN-DS3/SM-40	DS3 T3 optical electrical fiber modem / converter / extender, 40 km single mode dual fiber, AC or DC power supply options
AN-DS3/SM-60	DS3 T3 optical electrical fiber modem / converter / extender, 60 km single mode dual fiber, AC or DC power supply options
AN-DS3/SM-80	DS3 T3 optical electrical fiber modem / converter / extender, 80 km single mode dual fiber, AC or DC power supply options
AN-DS3/SM-100	DS3 T3 optical electrical fiber modem / converter / extender, 100 km single mode dual fiber, AC or DC power supply options
AN-DS3/SM-120	DS3 T3 optical electrical fiber modem / converter / extender, 120 km single mode dual fiber, AC or DC power supply options
AN-DS3/SM-WDM20	DS3 T3 optical electrical fiber modem / converter / extender, 20 km single mode single fiber, AC or DC power supply options
AN-DS3/SM-WDM40	DS3 T3 optical electrical fiber modem / converter / extender, 40 km single mode single fiber, AC or DC power supply options
AN-DS3/SM-WDM60	DS3 T3 optical electrical fiber modem / converter / extender, 60 km single mode single fiber, AC or DC power supply options

Your Name *
Your Company Name
Your Email *
Your Contact Number *
Subject *
Message *
Captcha *

Full Name *
Email *
Contact Number *
Company Name
Company Address
Subject *
How can we help you? *