Description
This device provides 1-64 Channel telephone, 2 Channel 10M/100M Ethernet interface (Wire Speed 100M), 2 Channel Ethernet interface is switch interface, can support VLAN. The whole machine works reliably and stably with low power consumption, high integration, small size and easy installation and maintenance.
Features
-
Based on self -copyright IC
-
Voice port supports FXO and FXS port,Support FXO/FXS, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone;
-
1~64 channel Voice access, Voice FXO / FXS interface, support for caller ID / reverse polarity billing / fax function;
-
Support various sites mutual number allocation function
-
Ethernet interface supports 10/100M, half/full duplex auto- adaptable, support VLAN
-
Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable)
-
Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μs, the peak output voltage 6KV open standards.
-
The transmission distance is up to 2-120 Km without retranslations – depends on fiber type, and ordering option
-
AC 220V, DC-48V, DC24V can be optional
Fiber
Multi-mode Fiber
50/125um
62.5/125um
Maximum transmission distance
5Km @ 62.5 / 125um multi mode fiber, attenuation (3dbm/km)
Wave Length: 1310nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
Link budget: 16dBm
Single-mode Fiber
8/125um
9/125um
Maximum transmission distance: 20 – 120 Km (depends on ordering option
Transmission distance for 40m module
40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
Link budget: 18dBm
Ethernet interface(10/100M)
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
FXS Phone Interface
Ring voltage: 75V
Ring frequency: 25HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
FXO Switch Interface
Ring detect voltage: 35V
Ring detection frequency: 17HZ-60HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
Return loss: 20 dB
Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
| Model | AN-FM-PCM64-2ETH |
| Functional Description | 64 * telephone，2*100 Mbps Ethernet，1* Fiber interface |
| Power |
Power supply: AC180V ~ 260V; DC –48V; DC +24V Power consumption: ≤10W |
| Dimension | Product Size: 485X138X45mm(WXDXH) 19 1U |
| Weight | 2.0KG |
AN-FM-PCM64-2ETH
64 ports RJ-11 Phone Voice over Fiber Multiplexer with 2 x Fast Ethernet ports, AC or DC power options available, SM or MM fiber with various distances
US 1166 
MY 300 
AP 191 
CN 114 
CA 85 
AU 82 
GB 71 
NZ 63 
