Highly safe N2 gas sealed circulation system, which can be operated with a spray dryer unit
Features of Solvent Recovery Unit (GAS410)
- The Inert N2 Gas Sealed System is used to prevent external discharge when combined with a spray dryer (ADL311SA or GB-210A) when using an organic solvent.
- Dehumidifier (Freezer) integrated in GAS410. No extra Freezer/ dehumidi-fier equipment needed
- Compressor included, no need for a separate compressor to operatethe spray dryer ADL311SA when using organic solvent samples
- Flammable or toxic solvents can be processed by combining a N2 gas sealed circulation system and a solvent recovery system (with freezer and capacitor)
- Explosion safety with closed loop N2 inert gas system
- Recovery of solvent to protect the environment and enable minimized pollution.
- Drying of easily oxidized materials is possible
- Supports low temperature drying of materials that easily deform with heat
- No freezing risk due to organic solvent with aqueous solution mixtures which could cause damage to the closed loop GAS410 system
- Spray drying and recovery of products and solvents are performed with meticulously devised safety measures
Specifications
| Item Code | 212774 |
|---|---|
| Model | GAS410 |
| Solvent recovery system | Capacitor + freezer |
| Circulating gas | N2 gas (sealed circulation when connected to ADL311SA or GB-210A) |
| Circulating volume flow | 0.12 to 0.65m3/min |
| Compressor (for spraying) | Linear compressor integrated |
| Circulation blower | Roots blower |
| Solvent recovery container | 2L flask |
| Freezer | Air-cooled condensation full-sealed type: 400W R404A |
| Solvent recovery mechanism | Capacitor cooling mechanism |
| Filter | Cartridge filter |
| Instruments | Cooling trap temperature display monitor Filter differential pressure meter (Monitor for clogging of filter) O2 density display monitor Blower wind amount adjusting volume |
| O2 sensor | Solid electrolyte (Zirconium) limit current type |
| Pump | For circulation to measure Oxygen |
| Safety device | O2 density meter, Flammable gas alarm, Electric leakage breaker, N2 gas forced introduction (when removing nozzles) |
| Required N2 amount | 15 L/h at 0.1 MPa |
| Accessories | Set of connection parts, anti-seismic clamps, interface cable, sample gas for gas alarm inspection, 2L flask |
| External dimensions（W×D×H mm） | 700×950×1500mm |
| Power Source |
000V Single phase AC200〜240V 5A（15A） |
| Weight | 130kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.
BR 20188 
US 11656 
VN 8904 
TR 2334 
CN 1824 
AU 1788 
CA 1748 
TH 1636 
