TJS100 Stainless Steel Hydraulic Pump Electric Self-Priming Jet Pump
TJS100 Stainless Steel Hydraulic Pump Electric Self-Priming Jet Pump
INSTALLATION AND USE
Suitable for use with clean water and liquids that are notchemically aggressive towards the materials from whichthe pump is made.
The self-priming JET pumps are designed to pump water evenin cases where air is present. As a result of their reliabilityand the fact that they are easy to use, they are recommendedfor use in domestic applications such as the distribution ofwater in combination with small or medium sized pressuresets, and for the irrigation of gardens and allotments, etc. The pump should be installed in an enclosed environment, or atleast sheltered from inclement weather.
MOTOR FEATURE
lnsulation ClassB
Protection IP44
Thermal protector
Continuous service S1
Two-pole induction motor
Single-phase 220V/50Hz, 60Hz on demand
Three-phase 380V/50Hz, 60Hz on demand
OPERATING CONDITION
Suction lift up to 8m
Liquid temperature up to 60°C
Ambient temperature up to 40°C
Add to cart
TJS100 Stainless Steel Hydraulic Pump Electric Self-Priming Jet Pump
INSTALLATION AND USE
Suitable for use with clean water and liquids that are notchemically aggressive towards the materials from whichthe pump is made.
The self-priming JET pumps are designed to pump water evenin cases where air is present. As a result of their reliabilityand the fact that they are easy to use, they are recommendedfor use in domestic applications such as the distribution ofwater in combination with small or medium sized pressuresets, and for the irrigation of gardens and allotments, etc. The pump should be installed in an enclosed environment, or atleast sheltered from inclement weather.
MOTOR FEATURE
lnsulation ClassB
Protection IP44
Thermal protector
Continuous service S1
Two-pole induction motor
Single-phase 220V/50Hz, 60Hz on demand
Three-phase 380V/50Hz, 60Hz on demand
OPERATING CONDITION
Suction lift up to 8m
Liquid temperature up to 60°C
Ambient temperature up to 40°C
PRODUCT DESCRIPTION
| COMPONENT | CONSTRUCTION CHARACTERISTICS |
| PUMP BODY | Cast iron |
| PUMP SUPPORT | Cast iron |
| MOTOR HOUSING | Aluminum |
| IMPELLER | Brass (PPO or AISI304 SS on demand) |
| MOTOR SHAFT | Carbon steel, AISI304 SS on request |
| MECHANICAL SEAL | Ceramic/Graphite |
| BEARINGS | 6203 RZ/6202 RZ(0.5HP&0.8HP&1HP), 6204 RZ/6204 RZ(1.5HP&2HP) |
US 7247 
GB 6881 
CA 6420 
AU 6258 
IE 4665 
NZ 1357 
BR 1160 
CN 785 
