CPM158-1 High Pressure Electric Centrifugal Water Pump
INSTALLATION AND USE
Suitable for use with clean water and liquids that are notchemically aggressive towards the materials from whichthe pump is made.
They are reliable and easy to use, so they are widely usedin domestic and civil applications such as the distributionof water in combination with small and medium sizedpressure tanks, for transferring liquids and for the irrigationof gardens and orchards.
The pump should be installed in an enclosed environmentor sheltered from inclement weather.
MOTOR FEATURE
lnsulation ClassB
Protection IP44Thermal protector
Continuous service s1
Two-pole induction motor
Single-phase 220V/50Hz, 60Hz on demand
Three-phase 380V/50Hz, 60Hz on demand
OPERATING CONDITION
Suction lift up to 8m
Liquid temperature up to 60°c
Ambient temperature up to 40°c
PRODUCT DESCRIPTION
| COMPONENT | CONSTRUCTION CHARACTERISTICS |
| PUMP BODY | Cast iron |
| PUMP SUPPORT | Cast iron |
| MOTOR HOUSING | Aluminum |
| IMPELLER | Brass, AlSl304 SS on demand |
| MOTOR SHAFT | Carbon steel, AISI304 SS on request |
| MECHANICAL SEAL | Ceramic/Graphite |
| BEARINGS | 6201RZ/6201RZ(0.5HP), 6203 RZ/6202RZ(0.75HP&1HP), 6204RZ/6204RZ(1.5HP&2.0OHP&3.0HP) |
US 13452 
GB 10528 
CA 9656 
AU 8547 
IE 6407 
VN 5818 
CN 4507 
BR 2132 
