Ethernet Access Chassis – 16 slots Redundant Power S

• Designed for high density Ethernet extender installations in central offices or enterprises
• Carrier Level Ethernet network over Optical fiber, G.SHDSL.bis and VDSL2 copper lines
• Manageable chassis: Web GUI, CLI
• Provides Fiber-Optic network traffic connection and conversion
• Multi-pair copper bonding for double or quadruple bandwidth
• Enables link layer OAM on the networks and equipments
• Link Diagnostics with one push button
• Hot swappable for all cards, Redundant powers and Green FAN available

Specification

Model

IEAC-16, 19″ chassis shelf with 16 slots for line cards
IEAC-AC: AC Power Input: 100 ~ 240V, 50/60Hz (160W)
iEAC-DC: DC Power Input: -36 ~ -72V (160W MTR-AC, 90~260VAC Power Module

• iEAC-16: Intelligent Ethernet Access Chassis
• MCU-16: Controller of iEAC-16 with NMS/WEB agent
• FNTU 761C/GE: 802.3ah Gigabit Ethernet Fiber MUX Network TDM Unit with Balanced E1(RJ-48)
• FNTU 761CU/GE: 802.3ah Gigabit Ethernet Fiber MUX Network TDM Unit with Unbalanced E1(BNC)
• ENTU 763C/GE: 802.3ah Gigabit Ethernet with a 1.25G SFP Transceiver slot; Optional SFP trunk module selectable; Card type
• ENTU 763C/FE: 02.3ah Fast Ethernet NTU with a 155M SFP Transceiver slot; Optional SFP trunk module selectable; Card type
• ENTU 763GO: Optical-Electrical-Optical Converter; Card type
• SNTU 764C/2W: G.shdsl.bis 2-wire RJ-45 to 10/100Base-TX RJ-45, Card type
• SNTU 764C/4W: G.shdsl.bis 4-wire RJ-45 to 10/100Base-TX RJ-45, Card type
• SNTU 764C/8W: G.shdsl.bis 8-wire RJ-45 to 10/100Base-TX RJ-45, Card type
• SNTU 765C/4W: G.shdsl.bis 4-wire RJ-45 to 10/100Base-TX RJ-45 and E1 interface, Card type
• VNTU 766C: VDSL RJ-11 to 10/100Base-TX RJ-45, Card type
• VNTU 766CX: VDSL BNC to 10/100Base-TX RJ-45, Card type

Physical Slot

• iEAC-16 chassis is containing a controller MCU-16, redundant AC/DC power modules and 16 slots for three types of line cards. Including FNTU, ENTU, SNTU and VNTU, all modules are hot swappable, managed through Web GUI, CLI (Telnet and craft port).

Optical Interface

• Connector type: SFP-LC

Ethernet Interface

• Connector type: Shield RJ-45 jack
• ENTU 763S/FE: 100Base-FX SFP modules
• ENTU 763S/GE: 1000Base-X SFP modules

LED Indicators

• MCU-16: MAJ/MIN ALM, FAN, FAN ON, PWR1, PWR2, ETH LNK/SPD
• FNTU: PWR, LNK, TST, ALM, E1, LAN Tx/Rx, LNK/SPD
• ENTU: PWR, CO, LNK, TST, RF, TP, LAN LNK/SPD
• SNTU: PWR, CO, ALM, TST, L1~L4, ETH LNK/SPD
• VNTU: PWR, CO, LNK, TST, LAN LNK/SPD

Power Requirement

• Hot Swappable Redundant Power Modules:
• DC: -36 ~ -72 VDC;
• AC: 100 ~ 240V, 50 ~ 60Hz

Dimension

• Line cards:84(W) x 168(D) x 24(H) mm.
• iEAC-16: 480(W) x 366(D) x 89(H) mm.

Operating Environment

• Operation temperature: 0oC ~ 50oC
• Storage temperature: -25oC ~ 70oC
• Relative humidity: up to 90% (non-condensing)

Application