Lime silo I
Level measurement and point level detection in the lime silo
 |
|
Process data
Measuring task
Level measurement and point level detection
Measuring point
Silo
Measuring range up to
30 m
Medium
Lime
Process temperature
-40 … +50 °C
Process pressure
0 … 0 bar
Special challenges
Strong dust generation and possible condensation
Application
For flue gas desulfurization a continuous production of the lime milk is required, the lime is kept on hand in sufficient quantities in large silos. Lime tends to readily adhere to more or less anything, depending on its type and consistency, interfering with equipment like the operation of instruments. A robust, non-susceptible level measurement is therefore absolutely necessary for reliable lime logistics and stocking. That’s why a non-contact measuring instrument that also works well in the very dusty environment is essential here.
Your benefit
Reliable
Reliable measurement even during filling
Cost effective
Accurate measurement of the entire container volume
User friendly
Simple mounting and setup
Recommended Products
VEGAPULS 69
Non-contact level measurement with radar in the lime silo
- Non-contact, maintenance-free measurement
- High measurement certainty despite extreme dust generation
- High operational reliability, even when water condenses on instrument
Measuring range - Distance
120 m
Process temperature
-40 ... 200 °C
Process pressure
-1 ... 20 bar
VEGAMIP 61
Non-contact point level detection with radar in the lime silo
- Non-contact, maintenance-free measurement
- Very long service life and low maintenance requirements through robust design
-
Simple measurement from outside the container
Measuring range - Distance
100 m
Process temperature
-40 ... 80 °C
Process pressure
-1 ... 4 bar
US 7336 
BR 3242 
CA 1663 
AU 1635 
TH 1570 
JP 1463 
SG 1216 
VN 816 
