Overview
The Edwards 30B5M vapour booster pumps offer higher pumping speeds, of up to
15000 ls-1 at pressures intermediate between mechanical boosters and diffusion pumps. Vapour boosters from Edwards have been proven in the field for over 30 years. With a constant program of updates and modernisation, with input from OEM's and end users, combined with inherent reliability, ease of use and tolerance to various inlet and exhaust pressures they have been used extensively in metallurgy and coating industries as well as other specialist applications.
15000 ls-1 at pressures intermediate between mechanical boosters and diffusion pumps. Vapour boosters from Edwards have been proven in the field for over 30 years. With a constant program of updates and modernisation, with input from OEM's and end users, combined with inherent reliability, ease of use and tolerance to various inlet and exhaust pressures they have been used extensively in metallurgy and coating industries as well as other specialist applications.
Technical Data
| Pumping speed (air) | 12500 ls-1 |
| Pumping speed (hydrogen) | 15000 ls-1 |
| Maximum throughput | 300 mbar ls-1 |
| 225 Torr ls-1 | |
| Critical backing pressure | 5.3-6 mbar |
| (with AP201 fluid) | 4-4.5 Torr |
| Recommended backing pump displacement | 290 m3h-1 |
| 171 ft3min-1 | |
| Recommended backing pump† | GXS450, E2M275 |
| Recommended fluid | Apiezon® AP201 |
| Fluid charge | 55 litre / 52 qt |
| Inlet connection | 12 x 20.60 holes on 686.0 PCD |
| Backing connection | 4 x 16.70 holes on 235.0 PCD |
| Water connection | 1 inch BSP |
| Heater power | 22.5 kW / 30 hp |
| Warming up time for full performance at | |
| maximum heater input | 60 min |
| Minimum water flow inlet | 1950l/h@ 25⁰C/ 8.5 US gal min-1 @ 25⁰ C |
| Weight | 620 kg / 1367 lbs |
† These are given for guidance, please contact Edwards for a recommendation of pump combinations best suited for your application.
MY 1520 
US 1149 
CN 249 
AU 91 
GB 66 
SG 64 
CA 61 
AP 50 
