Singapore Comet H4531R - rack mount thermometer with Ethernet interface and relays Transmitters and Regulators - Comet from Mobicon-Remote Electronic Pte Ltd

code: H4531R
Temperature transmitter for external Pt1000 probe with two relay outputs.

Sensor H4531R is designed for online monitoring of temperature. Three binary inputs to detection of two-states signals are the advantage. Other devices are controlled by two relay outputs.

Included in delivery:

H4531R sensor
Traceable calibration certificate
Quick start manual
Technical support at discussion forum

Technical parameters	Value
Output	Ethernet
Measured Value	Temperature
Construction Type	For External Temperature Probe Pt1000
Design	Rack 19''
Temperature Measuring Range	-200 to 600 °C
Relay Output	Yes
Two-State Input	Yes
Lcd Display	Yes
PoE	No
Accuracy of temperature intput	±0.2°C (without temperature probe)
Resolution	0.1°C
Measuring interval	2s
Available temperature units	degrees Celsius, degrees Fahrenheit
Temperature operating range	-30 to +80°C
IP protection	IP30
Number of relay outputs	2
Maximum switching voltage, current and power of relay output	50V, 2A, 60VA
Number of binary inputs	3
Signal for binary inputs	dry contact, open collector or two-state voltage signal. Inputs are not galvanically isolated.
Minimum pulse length at binary input	500ms
Low voltage level	0 to +0.5V
High voltage level	+3.0 to +30V
Audible alarm	built-in beeper - switchable
LAN connection	RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols	WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols	E-mail (SMTP authentication is supported), SNMP Trap, Syslog
Configuration	WWW interface, T-Sensor
Temperature operating range of LCD display	readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Power	12Vdc, maximum consumption 1W
Power connector	co-axial, diameter 5.5 x 2.1mm
Probe type	Pt1000/3850, shielded cable maximul length 10m
Dimensions	483 x 44 x 45mm (W x H x D), one 19'' rack unit 1U
Weight	approximately 1025g