Singapore Comet H0430 temperature transmitter and regulator with RS485 output Transmitters and Regulators - Comet from Mobicon-Remote Electronic Pte Ltd

code: H0430
Ambient temperature transmitter with two relay outputs. Outdoor, indoor use.

Built-in temperature sensor.

Temperature transmitter is equipped with three two-state inputs for detection of two-state signals - e.g. power presence, water, smoke, airflow, glass break detection, door contact.

Included in delivery:

H0430 sensor
Traceable calibration certificate
Quick start manual
Technical support at discussion forum

Technical parameters	Value
Output	RS485
Measured Value	Temperature
Construction Type	Ambient Air
Design	Industrial
Temperature Measuring Range	-30 to 80 °C
Relay Output	Yes
Two-State Input	Yes
Lcd Display	Yes
PoE	No
Maximum switching voltage, current, power of relay output	50V, 2A, 60VA
Audible alarm	from built-in beeper - switchable
Accuracy of temperature output	±0.4°C
Available temperature units	degrees Celsius, Fahrenheit
Signal for binary inputs	dry contact, open collector or two-state voltage signal. Inputs are not galvanically isolated.
Minimum pulse length at binary input	500 ms
Voltage at open contact	3.3 V
Low voltage level	0 to +0.5 V
High voltage level	+3.0 to +30V
Temperature operating range	-30 to +80°C
Temperature operating range of LCD display	readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Communication protocol	ModBus RTU, ARION and Advantech ADAM compatible protocol
Communication speed	110 to 115200 Bd
IP protection	IP65
Power	9-30Vdc, power consumption approximately 1W
Dimensions	136 x 191 x 45 mm (W x H x D), stem length 53 mm
Weight	approximately 350g