CVM-E3-Mini Three-Phase Power Analyzer
Product Description
Three-Phase Power Analyzer(balanced and unbalanced) for its assembly on DIN rails with very small dimensions, measuring in 4 quadrants.
Features
- Current measuring .../5 or .../1 A
- DIN rail format with only 3 modules
- Assembly on the 72 x 72 mm panel with frontal adaptor (cod. M5ZZF1)
- RS-485 Communications (Modbus-RTU)
- Two transistor outputs
- ITF technology: galvanic insulation protection inputs inputs, depending on the type
- Selection of parameters displayed
- Default page selection
- Universal power supply for the Plus type
- Sealable
CVM-Mini-MC
- Application for the control of switchboards and low and medium voltage connection points, where an analyzer must be installed on the DIN rail due to space restrictions.
- Control of instantaneous, maximum and minimum values of the electrical parameters metered.
| Power supply circuit |
230 V ac (-15...+10%) Plus: 85..0.265 V ac / 95...300 V dc |
| Consumption | 3 V·A |
| Frequency | 45...65 Hz |
| Metering circuit | |
| Nominal voltage | 300 V ac (ph-n) / 520 Vac (ph-ph) |
| Frequency | 40..0.65 Hz |
| Voltage consumption of the circuit | 0.7 V·A |
| Current consumption of the circuit | ITF 0.9 / Shunt 0.75 V·A |
| Transformadores | .../5 A ó.../ 1 A / 250 mA |
| Minimum direct current | 110 mA |
| Maximum direct current | 6 A |
| Maximum current con transformador | In /5 1,2 In |
| Class/Accuracy | |
| Voltage | 0.5 % ± 1 digit |
| Current | 0.5 % ± 1 digit |
| Power rating | 1 % ± 1 digit |
| Ambient conditions | |
| Operating temperature | -10 ... +50 ºC |
| Relative humidity (non-condensing) | 5 ... 95% |
| Altitud | 2000 m |
| Humidity | 20-90%RH |
| Output transistor | Optoinsulated (collector open) NPN |
| Maximum switching voltage | 24 V dc |
| Maximum switching current | 50 mA |
| Maximum impulse frequency | 5 impulse / s |
| Duration of the impulse | 100 ms / 100 ms |
| Build features | |
| Type of box | VO self-extinguishing plastic |
| Degree of protection |
Embedded equipment: IP 41 Terminals: IP 20 |
| Dimensions | 52.5 x 85 x 67.9 mm (3 modules) |
| Weight | 210 g |
| Safety | |
Designed for CAT III 300/520 Vac installations, in accordance with EN 61010.
Double-insulated electric shock protection, class II
Standards
IEC 664, VDE 0110, UL 94, IEC 801, IEC 348, IEC 571-1, EN 61000-6-3, EN 61000-6-1, EN 61010-1
Power Analyzer / Energy Values / Circutor / Electric Parameters / Low Voltage / ARON Connection / Backlit LCD SCREEN / Single-Phase. CVM-C10 from Saturn Pyro is the best available in Malaysia. High performance and cost effective Power Energy Meter with 4-quadrant measurement (consumption and generation). Suitable for Medium or Low voltage installations, in both 3 or 4-wire three-phase circuits, two-phase circuits with or without neutral, single-phase circuits or ARON connections. Available in Penang, KL, Selangor, Johor, Sabah, Sarawak & anywhere in Malaysia & Singapore.
Saturn Pyro provides reliable engineering services such Electrical Safety Survey, Power System Studies (Short Circuit, Load Flow & Protection Discrimination on ETAP), Arc Flash Assessment & Labeling, Design Of Earthing & Lightning Protection, Measurement Of Touch & Step potentials, Power Quality Management, Energy Audit and Data Center Performance Assessment. We also provides Electrical Safety Survey such as Inspection of an electrical installation, Identification of risk (electrical hazards), Review of documentation, operations & maintenance procedures, contingency planning, Generation of report in details of risk potentials and plan for mitigation, Closing report post implementationas. Available in Pulau Pinang, Johor, Kuala Lumpur (KL), Selangor and anywhere in Malaysia / Singapore / Bangalore / India / Mumbai.
