Drawbacks of insufficient lubricant for air compressor

1. Will lead to overheat and damage the machine

If the lubricant is insufficient or improper, after the air compressor has been working for a period of time, some of the parts will melt or expand and lead to damaging of the machine.

2. Sound and environmental pollution

When there is insufficient lubricant, the operation of the compressor will lead to some noise and might damage bearing and gear. In some circumstances, noise are affected by poor transmission or misplaced gearing. In this case, it will affecting the production and polluting the environment.

3. Machine not performing, wastage

During the working process of the air compressor, without proper amount of lubricant, the transmission parts might get stuck and lead to low performance of the machine. In this case, the air compressor will not be able to perform normally and the consumption of energy will increase proportionally.

4. Oil Spill

After the air compressor is running for a period of time, the oil from the cabinet might leak due to the damage of the screw or seal rings. Frequent cold start (oil produces foam) or too high oil level will lead to oil leakage. These will result in environment pollution.

5. Poor friction lubricant, lead to wear and tear

In conditions that the machine are lack of lubricant, the gearing are unable to work normally. The gear will be worn and spoilt easily. When the tooth surface of the gear is tear, the air compressor will be unable to work and perform normally, same goes to the bearing in the machine.

空滑不良致些重後果

1. 油高，形大，引起空工作一段後，由於滑油量不合或超荷等原因，油急遽上升，有些零件熔生故障; 有些零件形大，引起精度下降;有些零件在高下材料度降低，引起。

2. 震、噪音、境染重空後，有出尖叫，如音大且持持可能是承，磨; 如偶音大可能是，或有物卡住。有生大的抖象，可能是由於置固定不好或、承磨造成的。情，都重染境，使生失去安全感，影生，此必行查理。

3. 不，力耗大空在工作程中，件有卡住，出和不均等象，在情下，空法正常地荷、而且能量耗又特大。

4. 漏油空行一段後由於密封圈或螺，出箱漏油。有繁冷(油生泡沫) 或油位太高出通塞漏油，造成境染。

5. 摩擦副滑不良，致表面磨、合摩擦副表面，典型代表如副等合的零件，在劣的工件下，合面法形成良好油膜或形成了又很快破了，表面就出磨、合、塑性形等面失效形式，使空不能正常工作。承、承也容易出此故障。

Full Name *
Email *
Contact Number *
Company Name
Company Address
Subject *
How can we help you? *