0鸋igh-speed sampling of 16kS / s visualizes steep torque fluctuations.
0鸌t also supports the UTM series rotary encoder option!
0�3ch analog output torque, rotation speed, and angle.
0鸘p to 100 saved hold values can be output as data.
Light weight & compact body for 35mm DIN rail mount
Application software for USB interface
With communication through USB interface,
graph display, reading hold data,
setting parameters, and calibration can be done.
| Analog section | |
| Signal input range | -10 to +10V (UTMⅢ/UTF Option) Input impedance: 1MΩ or more -5 to +5V (UTMⅡ/UTMV) Input impedance: 1MΩ or more |
|---|---|
| Accuracy | Non-linearity： within 0.02%FS±1digit Zero drift： within 0.2mV/℃ RTI Gain drift：within 0.01%/℃ |
| Digital low-pass filter |
PASS,1 to 1kHz |
| A/D converter | Rate ：16000times/sec Resolution：24bit (binary) Approx. 1/30000 against 10V |
| Analog monitor output (Test point / UTF Option) |
Transmitted input voltage |
| Pulse input for rotation speed (open collector input/UTMⅡ/UTMV/UTMⅢ) | |
| Max. rotation speed | Depend on UTMⅡ/ UTMV/ UTMⅢ |
| Min. rotation speed | Selectable from 15, 10, 5, 3, 2rpm (when pulse rate is 4 ppr) Selectable from 60, 40, 20, 12, 8rpm (when pulse rate is 1 ppr) |
| Min. pulse width | 50μs |
| Circuit configuration |
No-voltage contact input (minus common) Connectable to open collector (Ic=Approx. 10mA) |
| Rotation speed input for low speed(Pulse input, open collector) | |
| Maximum input frequency | Approx. 1000rpm |
| Minimum input frequency | 0.1rpm |
| Minimum detection pulse width | 5μs |
| Circuit configuration | No-voltage contact input (minus common) Open collector connectable (Ic＝Approx. 10mA) |
| Pulse input for rotation speed (Line driver: RS-422A compliant/ UTF option) |
|
| Max. frequency | Depend on UTF |
| Circuit configuration |
Line driver (RS-422A compliant) |
| Encoder input(Pulse input) | UTMⅡ/UTMⅢ Compatible with rotary encoder option |
|---|
| Display section | |
| Display unit | Character height 8mm Numerical display by 7-segment green LED |
|---|---|
| Display content | Switchable numeric display (torque, rotation speed, Power/ Angle) |
| Display frequency | Selectable from 1, 3 , 6, 13, 25 times/sec. |
| External signal | |
| Output signal (2) | Selectable/ configurable Transistor’s open collector output Vceo=30V、 Ic=50mA |
|---|---|
| Input signal (1) | Selectable/ configurable Contact (relay, switch, etc.) or non contact (transistor, photo coupler, etc.) Input is ON when shorted to COM terminal |
| Interface | |
| USB | USB Interface |
|---|---|
| D3V | D/A converter voltage output(3ch) |
| 485 | RS-485 Interface |
| 422 | RS-422A Interface (UTF Option) |
| General performance | |
| Power supply voltage |
DC24V ±15% |
|---|---|
| Power consumption | 6W typ. |
| Operating conditions |
Temperature: Operating temperature range: -10℃ to +50℃, Storage temperature range: -20℃ to +85℃ Humidity: 85%RH or less (non-condensing) |
| Dimensions | 34(W)×88(H)×91(D)mm (Projections excluded) |
| Weight | Approx. 230g |
| CE marking certification | EMC directives EN61326-1 |
| Attachments | |
| Quick manual | 2 |
|---|---|
| Mini driver | 1 |
| Various I/O connector | 3 |
| Operating tool | 1 |
.png)
US 7949 
GB 7396 
CA 6891 
AU 6463 
IE 4655 
BR 916 
NZ 916 
MX 476 
