The design includes state-of-the-art technology with built in memory for retrieving dose, even during power-down. It eliminates outside interference from shock and RF. The RAD-60 is easily programmed by the user, has a digital display, and operates with a single AAA alkaline battery.
With the push of a button, you can turn the unit on/off, change the digital display to read dose or dose rate, select from several dose and dose rate alarm levels, turn the chirp functionon/off, reset the integrated dose, and perform battery tests. The large digital display gives instant dose or dose rate readings and the audible alarm is loud (>85dba)
Detector
Energy compensated Si-DiodeButton Functions
Front panel button has the following functions:- change display priority (dose/dose rate)
- switch ON/OFF
- chirp ON/OFF
- reset integrated dose
- change alarm thresholds
- activate battery test
Measurement Range
Dose: 1 uSv - 9.99 Sv or 0.1 mrem - 999 remEnergy Response
Hp(10), 60 keV - 3 MeV, better than + or - 25%, up to 6 MeV, better than + or - 35%Dose Rate
5 uSv/h - 3 Sv/h or 0.5 mrem/h - 300 rem/hDose Rate Linearity
Better than + or - 15% up to 3 Sv/h (300 rem/h)Calibration
Better than + or -5% (Cs-137, 662 keV at 2 mSv/h), Hp(10)Audible Alarms
Seven separate alarms, sound level typically better than 85 dBA at 30 cm- integrated dose
- dose rate
- dose overflow
- dose rate overflow at 3 Sv/h or 300 rem/h
- low battery 1 and 2
- defect
Alarm Thresholds
Six preset values each for integrated dose and dose rate-push button selectionConnectors
Infrared communication via bottom of the dosimeterPower Requirements
One triple A alkaline cell, typical life is 1800 hours in background (dose mode)Temperature Range
-20 - + 50° C operational, humidity up to 90% RH, non-condensed -20 - + 70° C storingWeight
80 g (including battery)Size
78 x 67 x 22 mmWarranty
1 Year Limited
US 8700 
AU 6395 
CA 6363 
GB 6069 
IE 3629 
BR 3626 
VN 3066 
NZ 2017 
