Vacuum evaporator with scraper system
Level measurement in a vacuum evaporator with scraper system
Process data
Measuring task
Level measurement
Measuring point
Tank
Measuring range up to
1.6 m
Medium
Extracted solution
Process temperature
+50 ... +80 °C
Process pressure
-0.7 ... -0.5 bar
Special challenges
Vacuum, buildup, condensation, vessel internals
Application
A thickening vessel fitted with a scraper is used to increase the concentration of extracted solutions by means of evaporation under vacuum. Extremely precise level measurement is required in this process because the concentration is determined by the filling height. The evaporation system operates according to meeting specified levels. As soon as they reach the correct value, the evaporation process is stopped and the concentrated solution is discharged out of the tank.
Your benefit
Reliable
Optimal concentration thanks to highly accurate level measurement
Cost effective
Easy cleaning without dismantling
User friendly
Simple installation and setup
Recommended products
VEGAPULS 64
Vacuum evaporator level measurement with non-contact radar
- Measurement down to the bottom of the vessel thanks to tight signal focusing
- Reliable measurement, unaffected by vessel internals due to high dynamic range
- Encapsulated antenna system, insensitive to condensation and buildup
- The front-flush, encapsulated antenna is easy to clean and resistant to the extreme conditions of the CIP and SIP processes
Measuring range - Distance
30 m
Process temperature
-196 ... 200 °C
Process pressure
-1 ... 25 bar
BR 23825 
US 21974 
GB 11606 
CA 8966 
AU 8212 
IN 6427 
VN 5011 
IE 4766 
