Ammonia separator
Level measurement and point level detection in the ammonia separator
 |
|
Process data
Measuring task
Level measurement and point level detection
Measuring point
Vessel
Measuring range up to
3 m
Medium
Ammonia
Process temperature
-40 ... 0 °C
Process pressure
+1 … +6 bar
Special challenges
Extreme diffusibility of the ammonia gas
Application
In the ammonia separator, the reaction gas mixture (ammonia, hydrogen, nitrogen, traces of methane) is cooled to the boiling point of ammonia (-33 °C). This condenses the ammonia gas. A bypass tube is typically used for measuring the level of the condensed ammonia. In addition, a limit switch is also installed directly in the vessel as a redundant measurement.
Your benefit
Reliable
Reliable measurement of volatile substances
Cost effective
Simple and maintenance-free operation
User friendly
Simple bypass installation
Recommended products
VEGAFLEX 81
Level measurement with guided radar in the separator
- Protection against diffusion by ammonia by means of a special sealing concept integrated in the sensor
- Shortenable sensors enable individual adaptation
- Precise measurement data despite condensate
- Available for up to SIL2
Measuring range - Distance
75 m
Process temperature
-60 ... 200 °C
Process pressure
-1 ... 40 bar
VEGASWING 63
Vibrating level switch as overfill protection in the separator
- Optimal protection thanks to ''Second Line of Defense''
- Simple setup without calibration
- Precise, reliable function through product-independent switching point
Process temperature
-50 ... 250 °C
Process pressure
-1 ... 64 bar
Version
Standard
Hygienic applications
with gas-tight leadthrough
with tube extension
with temperature adapter
BR 25572 
VN 10635 
MY 6886 
US 4630 
AR 2400 
IN 1929 
CN 1800 
EC 1204 
