Johor,Johor Bahru (JB),Taman Mount Austin Dew Point Sensor Energy Saving Product And Accessories from JB COMPRESSOR SERVICES SDN BHD

CS-iTEC dew point sensor / dew point transmitter S 212

Drifts caused by temperature changes, dust and aging are eliminated by the electronics providing reliable measurements. Recalibration interval thus could be increased to 2 years.

The measured dew point is output via a 4-20 mA signal output. The compact size of the sensors make them an ideal choice for installations in tight environments. Sensor parameters such as analogue output scaling, alarm values, units etc, can be easily changed by using CS-iTEC service kit.
This kit is used to connect the sensor to a PC for configuration changes.

The CS-iTEC dew point sensor S 212 provide reliable and long term stable dew point monitoring in industrial applications. The newly developed sensor features improved signal and stability in demanding industrial applications. It makes it an ideal choice for dew point measurements in desiccant dryers.

Application

Dew point measurement is used in:

Compressed air dryers and before sensitive equipment

Plastic injection process resin drying
Blow molding process
Medical gases in hospitals
Compressed air purity in food and pharmaceutical industry
In all industrial processes requiring high purity of clean and dry air (CDA)

Connection of S 212 with measuring chamber to compressed air

Product features

Dew point sensor for low dew point applications down to -50 ºC
Long term stability
IP65 casing provides robust protection in rough environment
Very fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
Can be installed directly into dryers through G 1/2″ thread
High accuracy of ±2 ºC dew poin

Technical data

Measuring range Dew point Relative humidity Temperature	-50 …+20 ºC 0 …99.9% -30 …+70 ºC
Accuracy	±2 ºC dew point @ -50 ºC
Pressure range	-0.1 … 5.0 MPa
Power supply	12 … 30 VDC / 60 mA
Ambient conditions	-20 … 50 ºC
Response time t90	0…-40 ºC: 2 minutes -40…0 ºC: 20 sec
Output signal	4…20 mA, 3-wire
Connection	M12, 5 pole
Casing	Zinc alloy
Classification	IP65
Process connection	G 1/2″ thread (ISO 228/1) UNF 5/8″ thread (on request)
Transport temperature	-10 … +60 ºC

Your Name *
Your Company Name
Your Email *
Your Contact Number *
Subject *
Message *
Captcha *

Full Name *
Email *
Contact Number *
Company Name
Company Address
Subject *
How can we help you? *