Characteristics of Semi-Auto Metallic Disc Saw Machine:

This series of pneumatic cutting machine is especially suitable for thin wall tube. Adopt two sides and two direction clamp which make workpiece stable. The precision is higher than band saw and bow saw with low noise and low pollution. The section is free of burrs and powder without secondary processing. The machine head can be adjust to the left and right for beveled cutting and grooving cut. Strong water circulation cooling system insures the life-span of saw blade. Use pole changing motor with two speeds which can meet the requirement of different metallic material cutting.

Technical Specification of Semi-Auto Metallic Disc Saw Machine:

Model KM-275PA KM-315PA KM-350PA Special for copper and aluminum KM-275PA-S KM-315PA-S KM-350PA-S Main motor power(kw) 2.2/1.5 3/2.2kw 3/2.2 2.2 2.2 3 Rotate speed of Main Shaft(rpm) 96/48 RPM 84/42 RPM 84/42 RPM 2850 2850 2850 Outer diameter of Saw Blade(mm) 250/275mm 275/300/315mm 300/315/350 250/275 275/300/315 300/315/350 Bore OD of Saw Blade(mm) Φ32mm Φ32mm Φ32mm Φ32mm Φ32mm Φ32mm Pin hole of Saw Blade 2×Φ11×PCD63 2×Φ11×PCD63 2×Φ11×PCD63 2×Φ11×PCD63 2×Φ11×PCD63 2×Φ11×PCD63 Maximum Round Pipe(mm) Φ80 Φ90 Φ110 Φ80 Φ90 >Φ110 Maximum Square Pipe (mm) 70×70 80×80 95×95 70×70 80×80 95×95 Cooling Water Pump(w) 90 90 90 90 90 90 Air Pressure (Mpa) 0.6-0.8 0.6-0.8Mpa 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 Volume of machine (mm) 950×720×1250 1100×720×1350 1160×750×1450 950×720×1250 1100×720×1350 1160×750×1450 Net Weight of machine (kg) 220kg 240kg 300kg 220kg 240kg 300kg