About CNC TILTING ROTARY TABLE GFA-101S/GFA-125S/GFA-170S/GFA-210S
 

MODEL SPECIFICATIONS	UNIT	GFA-101S		GFA-125S		GFA-170S		GFA-210S
Worktable Bore Diameter	mm/inch	Ø100/Ø3.94		Ø125/Ø4.92		Ø170/Ø6.69		Ø210/Ø8.27
Center Bore Diameter	mm/inch	Ø30H7 / Ø1.18H7		Ø30H7 / Ø1.18H7		Ø40H7 / Ø1.57H7		Ø65H7 / Ø2.56H7
hHeight Of Table (Horizontal)	mm/inch	205 / 8.07		224.5 / 8.84		260 / 10.24		280 / 11.02
Height Of Center (Vertical)	mm/inch	135 / 5.31		160 / 6.30		190 / 7.48		210 / 8.27
Width Of T-slot	mm/inch	12H7 / 0.47H7		12H7 / 0.47H7		12H7 / 0.47H7		12H7 / 0.47H7
Width Of Guide Block	mm/inch	18 / 0.71		18 / 0.71		18 / 0.71		18 / 0.71
Clamping Method/Pressure	Mpa/psi	Pneumatic		Pneumatic		Pneumatic		Pneumatic
		0.55 ~ 0.7 /		0.55 ~ 0.7 /		0.55 ~ 0.7 /		0.55 ~ 0.7 /
		79.8 ~ 101.5		79.8 ~ 101.5		79.8 ~ 101.5		79.8 ~ 101.5
Transmission Ratio		R	T	R	T	R	T	R	T
		1:75	1:120	1:90	1:90	1:90	1:90	1:90	1:90
Max. Table Speed	min-1	33.3	16.6	44.4	44.4	33.3	22.2	33.3	22.2
Allowable Loading Capacity	kg/lb	35/77		50/110		75/165		100/220
	kg/lb	20/44		35/77		50/110		70/154
Allowable Unblancing Work Moment	Nm/ft.lbs.	24/17.69		24/17.69		40/29.5		62/45.7
Allowable Load (When Table Clamped)	N/lbs	4000/897.60		4000/897.60		7000/1570.8		14000/3141.6
	Nm/ft.lbs.	200/147.4		140/103.2		300/221		400/294.7
	Nm/ft.lbs.	250/184.25		300/221.1		400/294.7		600/442
Allowable Loading Inertia	Kg.m2	0.044		0.1		0.28		0.55
Resolution	Kg	0.001		0.001		0.001		0.001
Indexing Accuracy	deg.	40"	60"	40"	60"	20"	60"	20"	60"
Repeatability	sec	6"	8"	6"	8"	6"	8"	6"	8"
Tilting Angle Range	deg.	-17~+107		-30~+120		-30~+120		-30~+120
Net Weight (Servo Motor Excluded)	kg/lb	90/198		120/264		180/396		230/490.6
Allowable Cutting Torque	Nm/ft.lbs.	85/62.65		85/62.65		200/147.4		250/184.25
Allowable Max. Rotary Joint Quantity	Port	-		3		4		4