Universal Testing Machine / Tensile Test Machine / Tension Tester Malaysia
A Computerised servo control universal testing machine (UTM) is a sophisticated piece of equipment used to determine the mechanical properties of materials. In fact, it is the modern, high-precision evolution of traditional mechanical testers. What’s more, its key advantage lies in its ability to perform a wide range of tests… For example, it can handle tensile, compression, and bending tests on everything from metals and plastics to textiles and cable.
-
Computer & Software: This is the user interface and data hub. Modern software provides:
-
Real-time graphical display of the stress-strain curve.
-
Automated calculation of material properties (Yield Strength, Tensile Strength, Modulus of Elasticity, Elongation, etc.)
-
Load Cell: A highly accurate that measures the force applied to the specimen.
-
Extensometer: An optional but crucial device that clamps directly onto the specimen to measure elastic elongation and strain with extreme accuracy.
-
Drive System:
*Servo Motor: An electric motor that provides precise and smooth motion. It is highly efficient, quiet, and clean.
*Ball Screw: Translates the rotary motion of the servo motor into precise linear motion of the crosshead.
-
Wide Range of Control Modes: Can seamlessly control tests based on Position, Speed, or Force, and can switch between them during a single test. Comprehensive data storage, reporting, and export capabilities.
-
Versatility: A single machine can perform a vast library of different tests simply by changing the grips and selecting the correct software method.
-
Powerful Data Analysis: The software automatically identifies key points on the stress-strain curve and generates detailed reports, eliminating manual calculation errors.
-
Safety: Built-in software and hardware limits protect both the machine and the operator from overloads and other hazardous conditions.
-
User-Friendly: Complex tests can be pre-programmed, allowing less experienced operators to run them reliably.
Specification
| Model | EI-UT1 | EI-UT5 | EI-UT20 | |
|---|---|---|---|---|
| Maximum Load Frame | 100kg | 500kg | 3000kg | |
| Load Cell Capacity | 10, 25, 50, 100kgf | 10, 25, 50, 100, 250, 500kgf | 10, 25, 50, 100, 250, 500, 1000, 2000, 2500kgf | |
| Machin Type | Bench Top | Floor | ||
| Accuracy of Force | ±0.5% | |||
| Effective Measuring Range | 0.2% ~ 100% (Full Scale) | |||
| Measuring Accuracy | < ±1% | |||
| Resolution | Max. load 1/200000, constant the resolution | |||
| Load Sensor | Basic configuration one or two sensors | |||
| Effective vertical Space | 600mm | 800mm | ||
| Test Speed | Up to 500mm/min | |||
| Accuracy of Displacement | < ±1% | |||
| Gauge Length of Elongation | Min span :10mm, Max range of deformation 1000mm Extended deformation span: 20mm, 25mm, 50mm, 100mm | |||
| Accuracy of Elongation | < ±1% | |||
| Safety | Crosshead travel limit protection, overload protection (software) | |||
| Return Back | Manual or automatic operation, after the test, the crosshead return to initial position with the highest speed by manual or automatic operation | |||
| Machine Size | 4000m x 350 x 1000mm | 660 x 480 x 1800mm | 970 x 570 x 2150mm | |
| Rate Voltage | 240V, 50Hz | |||
| Power | 0.2kW | 0.4kW | 0.75kW | |
| Weight | Approx. 80kg | Approx. 120kg | Approx. 300kg | |
